Products

Coil Art Handmade Fused Clapton Coils consist of two core wires with a thin wire wrapped around them. These coils allow for increased cloud thanks to it’s construction and it can be used at higher wattages. These coils fit a variety of RDAs, RTAs and RDTAs.

Available in 0.2 Ohm these vape coils are suited to both high wattage and mid wattage vaping. Please note these coils are intended for advanced users only.

Please Note: Different types of coils cannot be mixed and matched. 

Contains:

• 5 x Handmade Fused Claptons 0.2 Ohm (2x26G 38G)

Important information regarding Pre-made Coils and Rebuildables:

This product is designed for experienced users, and for those possessing an ohm reader or multimeter to test their coils on.

This item requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law. We don’t advise any beginners to start rebuilding coils without speaking to us or a knowledgeable shop. We do not recommend using this kind of product with a mechanical mod of any kind.

A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe

The Staple Staggered Fused Clapton pre-built coil by Diamond Mist is a large, complex coil designed for advanced users. The large surface area of the coil promotes greater vapour production compared to regular round wire. 

Reading 0.2 Ohms per coil or 0.1 Ohm per pair, these coils should only be used with powerful mods capable of delivering 100W of power or more. Because these coils are very large, we recommend using them on a dripper with a very large build deck.

Please Note: This product does not include any Cotton Wicks which must be purchased separately. Different types of coils cannot be mixed and matched.  

Contains:

• 10 x 0.2 Ohm Staple Staggered Clapton Coils. 

Please note: This product is designed for experienced users, and for those possessing an ohm reader or multimeter to test their coils on. This item requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law. We don’t advise any beginners to start rebuilding coils without speaking to a knowledgeable shop. We do not recommend using this kind of product with a mechanical mod of any kind.

Different types of coils cannot be mixed and matched.

A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

his prebuilt Hive coil from Diamond Mist is perfectly built and ready to go in the rebuildable dripping atomizer or rebuildable tank atomizer of your choice. Simply install in the deck of your device, add cotton and juice, and vape away. Hive Coils are built by taking a pair of wires and twisting them together, before taking another twisted pair and twisting those together. It’s a dense, gnarly coil designed for massive flavour and vapour.

Coming out at 0.25 ohms per coil or 0.125 ohms per pair, these coils are excellent for both flavour and vapour production. Due to the low resistance of these coils, we only recommend using them on mods that can fire 120W and above. 

Please Note: This product does not include any Cotton Wicks which must be purchased separately. Different types of coils cannot be mixed and matched.  

Contains:

• 10 x 0.25ohm Hive Coils (26GA A1*2)

Important information regarding Pre-made Coils and Rebuildables:

This product is designed for experienced users, and for those possessing an ohm reader or multimeter to test their coils on.

This item requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law. We don’t advise any beginners to start rebuilding coils without speaking to us or a knowledgeable shop. We do not recommend using this kind of product with a mechanical mod of any kind.

A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

This prebuilt Quad-Twisted coil from Diamond Mist is perfectly built and ready to go in the rebuildable dripping atomizer or rebuildable tank atomizer of your choice. Simply install on the deck of your device, add cotton and juice, and vape away.

Unlike other coils such as Hive and Clapton coils, these are compact coils, as such are very well suited for use in RTAs that offer less space to build on, such as the Aromamizer v2. Despite their compact size, the twisted nature of the coil gives it an increased surface area to vastly improve vapour production over regular coils.

Please Note: This product does not include any Cotton Wicks which must be purchased separately. Different types of coils cannot be mixed and matched.  

Contains:

• 10 x 0.25ohm Quad Twisted Coils (26GA A1*2)

Important information regarding Pre-made Coils and Rebuildables:

This product is designed for experienced users, and for those possessing an ohm reader or multimeter to test their coils on.

This item requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law. We don’t advise any beginners to start rebuilding coils without speaking to us or a knowledgeable shop. We do not recommend using this kind of product with a mechanical mod of any kind.

A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

Coil Art Handmade Alien Coils have been designed for used in RDAs, RTAs and RDTAs. They have a greater surface area that standard wound coils, this allows for not only a warmer vape but also increased flavour and cloud. 

Due to their construction they can be used at higher wattages. The Coil Art Alien Coils are available in a 0.3 Ohm for sub ohm vaping. Please note these vape coils are intended for advanced users only.

Please Note: This product does not include any Cotton Wicks which must be purchased separately. Different types of coils cannot be mixed and matched.  

Contains:

• 5 x 0.3 Ohm Alien Coils (3x28G 36G)

Important information regarding Pre-made Coils and Rebuildables:

This item requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law. We don’t advise any beginners to start rebuilding coils without speaking to us or a knowledgeable shop. We do not recommend using this kind of product with a mechanical mod of any kind.

A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

Coil Art Handmade Fused Clapton Coils consist of two core wires with a thin wire wrapped around them. These coils allow for increased cloud thanks to it’s construction and it can be used at higher wattages. These coils fit a variety of RDAs, RTAs and RDTAs.

Available in 0.3 Ohm these vape coils are suited to both high wattage and mid wattage vaping. Please note these coils are intended for advanced users only.

Please Note: This product does not include any Cotton Wicks which must be purchased separately. Different types of coils cannot be mixed and matched.  

Contains:

• 5 x 0.3ohm Fused Clapton Coils (2x25G 40G)

Different types of coils cannot be mixed and matched.

This item requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law. We don’t advise any beginners to start rebuilding coils without speaking to a knowledgeable shop. We do not recommend using this kind of product with a mechanical mod of any kind.

A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

The Flat wire pre-built coil by Diamond Mist is a large, complex coil designed for advanced users. The large surface area and fast heat-up time of the coil promotes greater vapour production compared to regular round wire. 

Reading 0.3 Ohms per coil or 0.15 Ohm per pair, these coils should only be used with powerful mods capable of delivering 100W of power or more. These coils are made of Kanthal A1 Wire.

Please Note: This product does not include any Cotton Wicks which must be purchased separately. Different types of coils cannot be mixed and matched.  

Contains:

• 10 x 0.3 Ohm Flat-wire Coils (26GA*18GA A1)

Important information regarding Pre-made Coils and Rebuildables:

This product is designed for experienced users, and for those possessing an ohm reader or multimeter to test their coils on.

This item requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law. We don’t advise any beginners to start rebuilding coils without speaking to us or a knowledgeable shop. We do not recommend using this kind of product with a mechanical mod of any kind.

A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

The Serpent pre-built coil by Diamond Mist is a large, complex coil designed for advanced users. The large surface area of the coil promotes greater vapour production compared to regular round wire. 

Reading 0.3 Ohms per coil or 0.15 Ohm per pair, these coils should only be used with powerful mods capable of delivering 100W of power or more. Because these coils are large, we recommend using them on a dripper with a large build deck. No cotton or wicks are included and must be purchased separately. 

Contains:

• 10 x Premade 0.3 Ohm Serpent Coils. 

Please note: This product is designed for experienced users, and for those possessing an ohm reader or multimeter to test their coils on. This item requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law. We don’t advise any beginners to start rebuilding coils without speaking to a knowledgeable shop. We do not recommend using this kind of product with a mechanical mod of any kind.

Different types of coils cannot be mixed and matched.

A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

This premade Tiger coil from Diamond Mist is perfectly built and ready to go in the rebuildable dripping atomizer or rebuildable tank atomizer of your choice. Simply install in the deck of your device, add cotton and juice, and vape away. A tiger coil is created by taking a core of regular kanthal wire, and wrapping a length of flat wire around, in much the same fashion as a Clapton Coil. The flat wire used give this type of wire it’s stripey look, which is where it gets the name from.

Coming out at 0.3 ohms per coil or 0.15 ohms per pair, these coils are perfect for both flavour and vapour production thanks to their massive surface area and low resistance. Due to the resistance of this coil, these are best suited to mods of 50 watts and above.

Please Note: This product does not include any Cotton Wicks which must be purchased separately. Different types of coils cannot be mixed and matched.  

Contains:

• 10 x 0.3 Ohm Tiger Coils (24GA A1)

Important information regarding Pre-made Coils and Rebuildables:

This product is designed for experienced users, and for those possessing an ohm reader or multimeter to test their coils on.

This item requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law. We don’t advise any beginners to start rebuilding coils without speaking to us or a knowledgeable shop. We do not recommend using this kind of product with a mechanical mod of any kind.

A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

This prebuilt Twisted coil from Diamond Mist is perfectly built and ready to go in the rebuildable dripping atomizer or rebuildable tank atomizer of your choice. Simply install in the deck of your device, add cotton and juice, and vape away.

Unlike other coils such as Hive and Clapton coils, these are compact coils, as such are very well suited for use in RTAs that offer less space to build on, such as the Aromamizer v2. Despite their compact size, the twisted nature of the coil gives it an increased surface area to vastly improve vapour production over regular coils.

Please Note: This product does not include any Cotton Wicks which must be purchased separately. Different types of coils cannot be mixed and matched.  

Contains:

• 10 x 0.35ohm Twisted Coils (26GA A1)

Important information regarding Pre-made Coils and Rebuildables:

This product is designed for experienced users, and for those possessing an ohm reader or multimeter to test their coils on.

This item requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law. We don’t advise any beginners to start rebuilding coils without speaking to us or a knowledgeable shop. We do not recommend using this kind of product with a mechanical mod of any kind.

A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

Coil Art Premade Tiger Coils consist of a Kanthal wire and a flat twisted Kanthal wrapped around it. Tiger coils have been designed for increased flavour, but due to it’s construction they also heat up very quickly. They can be used with a range of rebuildable atomisers.

These Coil Art coils are available in 0.36 Ohm resistance for sub ohm vaping. Please note they’re intended for advanced users only.

Contains:

• 10 x 0.36 Ohm Tiger Coils (26G 0.2x0.8)

Different types of coils cannot be mixed and matched.

This item requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law. We don’t advise any beginners to start rebuilding coils without speaking to a knowledgeable shop. We do not recommend using this kind of product with a mechanical mod of any kind.

A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

Coil Art Premade Alien Clapton Coils are larger versions of the standard Alien Coil. They feature an increased surface area for higher wattage vaping, which in turn produces greater flavour and cloud. These coils can be used in a range of RDAs, RDTAs and RTAs.

These Coil Art coils are available in a 0.45 Ohm resistance, making them ideal for sub ohm vaping. Please note they’re intended for advanced users only.

Contains:

10 x 0.3 Ohm Fused Clapton Coils (0.3x0.8G 32G)

Different types of coils cannot be mixed and matched.

This item requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law. We don’t advise any beginners to start rebuilding coils without speaking to a knowledgeable shop. We do not recommend using this kind of product with a mechanical mod of any kind.

A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

Coilart Premade Fused Clapton Coils consist of two core wires with a thin wire wrapped around them. This coil allows for increased cloud thanks to it’s construction and it can be used at higher temperatures. These coils fit a variety of RDAs, RTAs and RDTAs.

Available in 0.45 Ohm these vape coils are suited to both high wattage and mid wattage vaping. Please note these coils are intended for advanced users only.

Coil Art Premade NiChrome 80 Coils have been designed for use in a variety of RDAs, RDTAs and RTAs. NiChrome vape coils heat up faster than standard coils for a shorter ramp up time.

These vape coils are available in 0.5 Ohm resistance, for sub ohm vaping. We recommend them for advanced users only.

Coil Art Premade Stainless Steel 316L Coils can be used in a range of RDAs, RDTAs and RTAs. Stainless Steel coils can be used in both variable wattage mode and temperature control mode making them very versatile.

These Coil Art vape coils are available in a 0.5 Ohm resistance for sub ohm vaping. Please note these coils are intended for advanced users only.

This premade Tiger coil from Diamond Mist is perfectly built and ready to go in the rebuildable dripping atomizer or rebuildable tank atomizer of your choice. Simply install in the deck of your device, add cotton and juice, and vape away. A tiger coil is created by taking a core of regular kanthal wire, and wrapping a length of flat wire around, in much the same fashion as a Clapton Coil. The flat wire used give this type of wire it’s stripy look, which is where it gets the name from.

Coming out at 1.0 ohms per coil or 0.5 ohms per pair, these coils are perfect for both flavour and vapour production thanks to their massive surface area and low resistance. Due to the resistance of this coil, these are best suited to mods of 50 watts and above.

Please Note: This product does not include any Cotton Wicks which must be purchased separately. Different types of coils cannot be mixed and matched.  

Contains:

• 10 x 0.5ohm Tiger Coils (28GA A1)

Important information regarding Pre-made Coils and Rebuildables:

This product is designed for experienced users, and for those possessing an ohm reader or multimeter to test their coils on.

This item requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law. We don’t advise any beginners to start rebuilding coils without speaking to us or a knowledgeable shop. We do not recommend using this kind of product with a mechanical mod of any kind.

A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

This prebuilt Twisted coil from Diamond Mist is perfectly built and ready to go in the rebuildable dripping atomizer or rebuildable tank atomizer of your choice. Simply install in the deck of your device, add cotton and juice, and vape away.

Unlike other coils such as Hive and Clapton coils, these are compact coils, as such are very well suited for use in RTAs that offer less space to build on, such as the Aromamizer v2. Despite their compact size, the twisted nature of the coil gives it an increased surface area to vastly improve vapour production over regular coils.

Please Note: This product does not include any Cotton Wicks which must be purchased separately. Different types of coils cannot be mixed and matched.  

Contains:

• 10 x 0.5ohm Twisted Coils (28GA A1)

Important information regarding Pre-made Coils and Rebuildables:

This product is designed for experienced users, and for those possessing an ohm reader or multimeter to test their coils on.

This item requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law. We don’t advise any beginners to start rebuilding coils without speaking to us or a knowledgeable shop. We do not recommend using this kind of product with a mechanical mod of any kind.

A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

Coil Art Premade Kanthal Coils are designed for used in rebuildable atomisers, including RDAs, RTAs and RDTAs. Kanthal wire is the most common wire type, it offers a good balance between cloud and flavour, while remaining durable.

These Coil Art vape coils are available in 0.6 Ohm for sub ohm vaping. Please note that these coils are intended for advanced users only.

Coil Art Premade Clapton Coils consist of a core wire with a thinner wire wrapped around it. They can be used in a variety of rebuildable atomisers, including RDAs, RTAs and RDTAs. Clapton vape coils have a larger surface area meaning an increase in cloud as well as flavour.

These vape coils are available in 0.85 Ohm resistance, making them ideal for a range of vaping styles.