CONGREVAPE DOGE V4 24MM RDA
The Doge V4 RDA by Congrevape, is a 24mm RDA (Rebuildable Dripping Atomiser) designed with customisation in mind. The kit comes with two 24K Gold-Plated build decks, allowing for a variety of coil builds. This is an RDA for advanced users and coils builders.
The first deck, is a 24K Gold-Plated Two Post Clamp build deck. It features 4mm clamping space and a 7mm Deep Juice Well. With a maximized build space, the sky’s the limit; allowing the user to install large flat single coil builds and dual coil builds. The clamp deck has internal springs to keep the clamps up when unscrewed for easier building. When you’ve finished building simply add your cotton wick and drip away.
The second deck, is a 24K Gold-Plated Four Post build deck, upgraded from the earlier versions of the Doge RDA. This deck has an 11mm Deep Juice Well and four equally sized post holes - with a single terminal per post. These posts can hold speciality, round, flat and even premade coils, while still allowing the user to create single or dual coil builds.
Both variations of deck also support a BF Pin (Bottom-Feeding Pin), which comes included in the kit - allowing the Congrevape Doge V4 to be used as a Squonk RDA. Alternatively the standard 510 pin also included can be used with either deck.
The Cyclops Air Flow on the Doge V4 has been laser cut to avoid noise when inhaling; the air holes are also fully adjustable for a tighter or looser draw. This is all topped of with a Ceramic 10mm Bore Drip Tip.
- 1 x Congrevape Doge V4 24mm RDA
- 1 x 24K Gold Plated Four Post Build Deck
- 1 x 24K Gold Plated Two Post Clamp Style Build Deck
- 1 x 510 pin
- 1 x BF Pin (Bottom-Feeding Pin)
- 1 x 10mm Tapered Bore Ceramic 810 Drip Tip
- 1 x Spare Parts Pack
- 24mm Diameter
- 24k Gold-Plated Build Decks
- Single and Dual Coil Builds
- Two Post Clamp Deck Option
- Four Post Build Deck Option
- Adjustable Cyclops Airflow
Important information about Rebuildable Dripping Atomisers:
This product is designed for experienced users, and for those possessing an ohms reader or multimeter to test their coils on. This device requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and Ohm’s law.
We don’t advise any beginners to start rebuilding coils without speaking to a knowledgeable shop. A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.