ASMODUS PUMPER 18 80W SQUONK VAPE MOD

£99.99
Size
✔ In Stock

Order by 5PM for same working day dispatch. More Detail

✔ Price Match Guarantee

We will never be beaten on price! Terms & Conditions Apply.

✔ Free UK Delivery

FREE UK Delivery on all orders over £20.00. More Detail

Add To Wishlist
Vendor: Asmodus

Availability: In Stock

Product Code:

The Asmodus Pumper 18 is a semi-regulated squonk device, that can be used with a Bottom Feeding RDA (Rebuildable Dripping Atomiser) only. The Pumper 18 has an 80W maximum output and is...

The Asmodus Pumper 18 is a semi-regulated squonk device, that can be used with a Bottom Feeding RDA (Rebuildable Dripping Atomiser) only. The Pumper 18 has an 80W maximum output and is powered by a single 18650 vape battery (sold separately). This high end kit features unique wood staining and a newly designed juice bottle. This vape device is intended for advanced users.

The Pumper 18 is hard wearing yet light thanks to it’s combination of stainless steel and stabilized wood. The wood has an attractive two tone staining for a high end look and unique finish, making no two identical. A twist bottom battery cylinder allows 18650 batteries to be installed easily and reduces battery rattle. The juice bottle uses the same vacuum technology seen in the Asmodus Spruzza, with a handy push lever allowing for easy squonking.

This Asmodus squonk box has a clean design, featuring a large fire button and no screen. Similar in it’s design to a mechanical device, power is drawn directly from the battery and runs straight into your BF RDA. The VL-80-JX Chipset has been installed which gives this device extra protections, including - Negative Polarity Protection, Low Voltage Protection, 10 Second Shut Off, Atomiser Short Protection and Overheat Protection.

Please Note (Again): Due to the vacuum sealing process during manufacturing, you may experience slight condensation (water drops) on the inside of the juice box. This is normal, and not considered a fault. Please use as you would regularly.

Contains:

  • 1 x Asmodus Pumper 18 Mod
  • 1 x User Manual

Features:

  • Requires Single 18650 Battery
  • High End Stabwood Finish
  • Squonk Bottle
  • Unique Chipset
  • Safety Protections

SEMI REGULATED MOD ALERT


Top Tips - Semi Regulated Devices are Intended for Advanced Users ONLY

We don't recommend building below 0.2Ω
Always use an Ohms Reader to check resistance before using
For low resistance builds use high amp batteries
Ensure your battery wrap is intact
Ensure your locking switch is activated when not in use
Store your batteries safely in a case, never loose
Use a dedicated charger for batteries
Never leave charging batteries unattended
Dispose of batteries responsibly
Avoid short circuits by ensuring coils are installed as per manufacturer instructions
Battery / Amperage Guide (Do Not Exceed Limits)

1.0ohms - 4.2A Amp Draw
0.9ohms - 4.6A Amp Draw
0.8ohms - 5.2A Amp Draw
0.7ohms - 6.0A Amp Draw
0.6ohms - 7.0A Amp Draw
0.5ohms - 8.4A Amp Draw
0.4ohms - 10A Amp Draw
0.3ohms - 14A Amp Draw
0.2ohms - 21A Amp Draw (RECOMMENDED LIMIT)
0.1ohms - 42A Amp Draw (NOT RECOMMENDED)
0.0ohms - BATTERY SHORT (DEFINITELY NOT RECOMMENDED)

Please note: This is a semi regulated vape device, by pushing the fire button you complete a circuit that directly runs power from your battery through the device and into your RDA. We do not advise under any circumstances for a semi regulated device to be used without a thorough knowledge and understanding of battery safety, battery output, Ohm’s law and vaping in general. This is a vape device for very advanced users only - this should not be used by beginners or casual vapers. If you have any questions or queries regarding semi regulated devices or vaping in general, please contact us

 

Battery Size 18650 Battery Type Single 18650 Made In China Max Wattage 80W Mod Features Fixed Wattage Vape Hardware Brand Asmodus

Weight:134g Height:8.4cm (3.3") Width:4.7cm (1.9") Depth:2.7cm (1.1")

Related Products

Top

Panel Tool
Float header
Float topbar
Default Boxed Large Boxed Medium
Header Default Header One