0.25 OHM DIAMOND MIST PREMADE HIVE COILS
his prebuilt Hive coil from Diamond Mist is perfectly built and ready to go in the rebuildable dripping atomizer or rebuildable tank atomizer of your choice. Simply install in the deck of your device, add cotton and juice, and vape away. Hive Coils are built by taking a pair of wires and twisting them together, before taking another twisted pair and twisting those together. It’s a dense, gnarly coil designed for massive flavour and vapour.
Coming out at 0.25 ohms per coil or 0.125 ohms per pair, these coils are excellent for both flavour and vapour production. Due to the low resistance of these coils, we only recommend using them on mods that can fire 120W and above.
Please Note: This product does not include any Cotton Wicks which must be purchased separately. Different types of coils cannot be mixed and matched.
- 10 x 0.25ohm Hive Coils (26GA A1*2)
Important information regarding Pre-made Coils and Rebuildables:
This product is designed for experienced users, and for those possessing an ohm reader or multimeter to test their coils on.
This item requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law. We don’t advise any beginners to start rebuilding coils without speaking to us or a knowledgeable shop. We do not recommend using this kind of product with a mechanical mod of any kind.
A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.