VAPE KITS WITH REPLACEABLE BATTERIES

SMOK X-PRIV 225W VAPE KIT

The Smok X-Priv Kit features the innovative 2ml TFV12 Prince Tank and a 225W X-PRiv Mod that's basically a screen with batteries.

The Smok X-Priv is a large box mod with a 225W output - perfect for sub ohm vaping. The X-Priv is powered by dual 18650 vape batteries (sold separately) and has a slight curve allowing it to fit comfortably in your hand.

This is a robust box with a large fire bar and a two inch HD screen that takes up an entire side panel. The menu buttons are located at the bottom right of the HD screen allowing you to view and adjust your settings in real time via the newly designed user interface.

Along with TC (Temperature Control) Mode, VW (Variable Wattage) Mode and VV (Variable Voltage) Mode - the Smok X-Priv includes a preheat function to compensate for slow ramp up when larger coils are used in RDAs (Rebuildable Dripping Atomisers) and sub ohm tanks, for balanced firing and cloud production.

The Smok TFV12 Prince Tank is the 'son' of Smok's well-regarded TFV12 Cloud Beast King, with this prince featuring a re-designed set of TFV12 Prince vape coils, along with other additions to the Taste Furious series. 

The Prince Vape Tank features a newly-designed Crown body, constructed of high-quality stainless steel, with the tank section made from heat-resistant pyrex glass. The colourful Cobra drip tips included with the tank are constructed of resin, and feature a unique snake-skin design.

Contains:

  • 1 x Smok X-PRIV 225W Mod
  • 1 x Smok TFV12 Prince Vape Tank
  • 1 x V12-Prince Q4 0.4Ω Quad Coil (Preinstalled)
  • 1 x V12-Prince T10 0.12Ω Decuple Coil (Spare)
  • 1 x USB Cable
  • 1 x User Manual
  • 1 x Bag of Spare Parts

Features:

X PRIV Mod

  • 225W Maximum Output
  • Requires Dual 18650 Batteries
  • Two Inch HD Screen
  • Zinc Alloy Construction
  • VW (Variable Wattage) Mode
  • VV (Variable Voltage) Mode
  • TC (Temperature Control) Mode
  • Preheat Function

TFV12 Prince Tank

  • 2ml Capacity
  • Stainless Steel 
  • Pyrex Glass
  • Cobra Resin Drip Tip
  • Redesigned Crown Body

Important Note About Sub Ohm Vaping:

This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

£0.00
WISMEC SINUOUS RAVAGE230 VAPE KIT

The Wismec Sinuous Ravage 230W Vape Kit is a high-powered sub-ohm vape kit that features a 230W Max output and is powered by dual 18650 batteries. A supplied USB charging cable allows for quick 2A charging via the USB port situated on the side of the device, and a large 1.45inch colour screen displays all user information.

In the box comes Wismec's Gnome EVO tank, the second iteration of their well-received vape tank. It features an easy top-filling mechanism, with an improved airflow control and a child-lock safety mechanism.

Contains:

  • 1 x Wismec Sinuous Ravage230 Vape Mod
  • 1 x Wismec Gnome Evo Tank
  • 2 x WM01 0.4Ω Coils
  • 1 x USB Cable
  • 2 x User Manual
  • 2 x Warning Card
  • 1 x Bag of Spare Parts

Specifications:

Wismec Gnome Tank

  • 2ml Capacity
  • Top Filling
  • Adjustable Airflow
  • Child Proof Mechanism

Wismec Sinuous Ravage230 Mod

  • 230W Max Output
  • Dual 18650 Required
  • USB Charging
  • 1.45inch Colour Screen

Important information about Sub Ohm vaping:

This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

ASPIRE SKYSTAR 210W TOUCH SCREEN VAPE KIT

The Aspire SkyStar Kit contains the revolutionary (pun-intended) Revvo Tank, as well as the dual-18650 battery mod; the SkyStar 210W. The mod features a 1.3 inch touch screen, displaying user information as well as input controls. 

The Aspire Revvo Tank uses a uniquely designed coil, featuring a flat, disc-shape instead of the standard shape we’re used to. The tank is a top-fill top-airflow, and is constructed from Stainless Steel and Pyrex glass, and the innovative ARC (Aspire Radial Coil) sits horizontally in the tank, looking rather similar to a kitchen hob. It utilises an increased surface area due to its shape, which aims to improve flavour and vapour production.

Contains:

  • 1 x Aspire Revvo Tank
  • 1 x Aspire SkyStar 210W Mod
  • 2 x ARC 0.10 - 0.16Ω Sub Ohm Coils
  • 1 x Glass Tube
  • 10 x O-Rings
  • 1 x USB Cable
  • 2 x Warning Cards
  • 1 x User Manual
  • 1 x Warranty Card
  • 1 x Protective Cap

Features:

Aspire Revvo Tank:

  • Uses Radial “Flat’ Coil Design
  • 0.10 - 0.16Ω Coil Rating
  • Protective Cap
  • Top Filling
  • Top Airflow

Aspire SkyStar Mod:

  • Dual 18650’s Required
  • 210W Output
  • 1.3 inch Touch Screen

Important Information About Sub Ohm Vaping:

This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

£64.99
VAPORESSO SWITCHER 220W VAPE KIT

The Vaporesso Switcher Kit features a both a 220W Vape Mod along with the Vaporesso NRG tank. It comes with Vaporesso's patented OMNI 2.6 Chipset that has quick charging and USB input protection.

One of the Switcher's defining features is its ability to change the metal faceplates (sold separately), allowing for a range of colours and styles to be used on the one mod device. The Limited Edition version features an LED, allowing the device to light up on the sides and at the back (the standard version does not have this feature).

The Switcher mod has Vaporesso's OMNI Board 2.6 chipset allowing for simple operation and ease of use. It takes dual 18650 batteries for power, which can be charged via the USB cable provided in the box. Included with the kit is the top filling NRG vape tank, taking Vaporesso's GT Core coils which are available in sub ohm resistances.

Contains:

  • 1 x Vaporesso Switcher 220W Vape Mod
  • 1 x Vaporesso NRG 2ml Vape Tank
  • 1 x 0.15Ω GT8 Core (Preinstalled)
  • 1 x 0.15Ω GT4 Core (Spare)
  • 1 x USB Cable
  • 1 x Replacement Glass Tube
  • 1 x User Manual

Features:

  • 220W Output
  • Dual 18650 Batteries Required
  • OMNI 2.6 Chipset
  • Quick Charging
  • Replaceable Case Design

Important Note About Sub Ohm Vaping:

This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

UWELL NUNCHAKU 80W VAPE STARTER KIT

The Uwell Nunchaku Starter Kit, is an intelligent vape pen. Despite the fact this is Uwell’s first entry into the vape device market, it is a refined piece of hardware that is easy to use. It has an 80w output, powered by a single 18650 vape battery (sold separately) and includes the Nunchaku tank.

The Nunchaku has a clean and simple aesthetic, but don’t let that fool you; it still gives the user access to a host of functions typically seen only in box mods. Including VW (Variable Wattage) Mode, TC (Temperature Control) Mode, and the ever popular Bypass Mode - which allows the device to act like a mechanical mod by drawing power directly from the battery. All modes can be viewed and change via the compact display screen, located at the bottom of the device.

Safety as ever is a paramount concern for Uwell, and the Nunchaku includes low voltage protection, short circuit protection, low resistance protection, and an 8 second cutoff. All ensuring a safer and better vape experience. When it comes to charging the 18650 battery, it can either be easily removed from the Nunchaku and charged externally; or it can be charged internally via USB.

The Nunchaku sub ohm tank has a 2ml fill capacity and has the option of using either 0.2 Ohm or 0.4 Ohm coils. This is coupled with Uwell’s innovative Pro-FOCS (Professional Flavor Optimizing Core System) which increases the quality of flavour.

Coil change and general maintenance have been made even easier, as the Nunchaku has a plug and pull coil design - for a quick and clean coil change. When it comes time to clean the tank, you’ll appreciate the new condensation holder, which while reducing spit back and leaking also allows for a quicker clean up.

Overall, while the Nunchaku is a vape starter kit aimed at new users, it should also be considered for use by experienced vapers due to it’s features and design.

Contains:

  • 1× Nunchaku Mod
  • 1× Nunchaku Tank
  • 1x  Spares Kit
  • 1× 0.25 Ohm Coil (pre-installed)
  • 1× 0.4 Ohm Coil
  • 1× USB Charging Cable
  • 1× User Manual

Features:

  • 80W Output
  • Requires Single 18650 Battery
  • Variable Wattage Mode
  • Temperature Control Mode
  • Bypass Mode
  • 2ml Tank Capacity
  • Plug and Pull Coils

Important Information about Sub Ohm Vaping:

This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

SMOK H-PRIV 2 225W VAPE KIT

The Smok H Priv 2 is a sub ohm vape kit, with a maximum 225W output and is powered by dual 18650 vape batteries (sold separately). The kit comes complete with the smok TFV12 Big Baby Prince Tank with a 2ml capacity. A unique honeycomb design and upgraded interface sets the H Priv 2 apart; this kit is intended for advanced users.

The H Priv 2 fits well in the hand and has a reassuring weight, a large lateral fire key is fitted to the side of the device. A battery hatch located at the bottom slides away and can be securely closed to avoid battery rattle. The OLED screen clearly displays output modes and other information, it’s fitted onto the top of the device so it can be read even when you vape.

Multiple output modes make the H Priv 2 a device that can be configured to different vaping styles. VW Mode (Variable Wattage Mode) allows for control of the wattage output. TC Mode (Temperature Control Mode) allows for control of the heating levels and for multiple vape coil types to be used.

The TFV12 Big Baby Prince vape tank features a 2ml capacity and two coil options. The cobra drip tip provides a unique aesthetic and also increased airflow, which is further enhanced by adjustable bottom airflow. 

A newly designed top filling mechanism includes a childproof catch to increase safety and reduce leaking. Both the Q4 and T12 coils have been designed for sub ohm vaping and create both large clouds and increased flavour.

Please Note this tank is only compatible with the EU Core coils and not the standard V8 Baby coils. 

Contents:

  • 1 x H-Priv 2 Mod
  • 1 x TF12 Big Baby Prince Tank (2ml)
  • 1 x V8 Baby-Q4 EU Core (0.4ohm) Quadruple Coil (pre-installed)
  • 1 x V8 Baby-T12 EU Core (0.15ohm) Duodecuple Coil
  • 1 x USB Cable
  • 1 x User Manual
  • Spare Parts

Features:

Smok H-Priv 2 Mod

  • 225w Output
  • Dual 18650s Required (sold separately)
  • OLED Display
  • Variable Wattage / Temp Control
  • Upgradeable Firmware

Big Baby Prince Tank

  • 2ml Capacity
  • Cobra Drip Tip
  • Adjustable Airflow
  • Top Fill
  • Patented Top Cap Locking Mechanism

Important information about Rebuildable Dripping Atomisers:

This product is designed for experienced users, and for those possessing an ohms reader or multimeter to test their coils on. This device requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law.

We don’t advise any beginners to start rebuilding coils without speaking to a knowledgeable shop. A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe

£69.99
JOYETECH ESPION SOLO 21700 VAPE KIT (BATTERY INCLUDED)

The Joyetech Espion Solo Kit is a sub ohm vape kit that celebrates Joyetech’s ten year anniversary; comprised of the touchscreen espion solo mod with an 80W maximum output and the 2ml ProCore Air Tank. This sub ohm vape kit is powered by a single 18650 vape battery or 21700 vape battery. A 21700 battery is included with kit, the 18650 is sold separately. The Espion Solo is intended for advanced users.

The Espion Solo has a sleek body and a reassuring weight. It features a 1.3 OLED touchscreen, that’s been designed with user interface in mind. Through the screen you can access the output modes and edit the various aesthetics including a digital clock. There’s also upgradeable firmware through Joyetech’s custom software.

Multiple output modes make the Espion a device that can be configured to multiple vaping styes. Power Mode allows for control of the wattage output, TC Mode (Temperature Control) allows for multiple wire types to be used in your coil, perfect for those who use RDAs (Rebuildable Dripping Atomisers). The same is true for TCR (Temperature coefficient of Resistance) Mode. 

Finally there’s Bypass Mode which allows the device to act like a mechanical mod, by drawing power directly from the battery and firing at the maximum possible wattage - while still providing the standard safety features associated with a regulated vape device.

The ProCore Air Vape Tank has a 2ml fill capacity and top fill capabilities. The top cap slides open to reveal a generously sized juice port that will fit most bottle nibs, it closes easily and securely to prevent leaking.

With the option of six coil types, Joyetech have ensured that multiple vaping styles will be supported, with a balance between flavour and cloud production throughout.

Contains:

  • 1 x Joyetech Espion Solo Mod
  • 1 x ProCore Air Vape Tank
  • 1 x 21700 Vape Battery
  • 1 x ProC Coil
  • 1 x User Manual
  • 1 x USB Charging Cable

Features: 

  • Single 18650 / 21700 required
  • 1.3 OLED Touchscreen
  • 80W Output Maximum Output
  • Multiple Output Modes
  • 2ml Fill Capacity Tank
  • Top Fill
  • Anti-Leak
  • Multiple Coil Options

Important information about Sub Ohm vaping:

This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

£69.99
INNOKIN PROTON 235W VAPE KIT

The Innokin Proton Kit is a 235W vape kit, made up of the Innokin Proton mod and the Innokin Scion Two Tank. Powered by dual 18650 vape batteries (sold separately) the Proton features a custom chipset and large screen. The Scion 2 vape tank is top fill and features a 2ml fill capacity. This sub ohm vape kit is advised for advanced users.

The Proton has a sleek and ergonomic design, with one side of the mod acting as fire button. It features a 1.45 TFT full colour screen - which clearly displays output modes and various function including six preloaded themes, all of which can be controlled and selected by the tactical joystick located underneath the screen. The Proton also features upgradeable firmware for further customisation.

Powered by the Innokin 235 Chipset, this device gives the user access to a Preheat Function and a whole host of output modes, including: Variable Wattage Mode, Variable Voltage Mode and Temperature Control Mode. Whilst in TC Mode, the user can further access TCR (Temperature Coefficient of Resistance) Mode, which allows multiple wire alloy types to be used.

The Scion 2 Tank is a 2ml TPD compliant vape tank, that features an innovative slide top mechanism, which reveals a large juice port for faster and cleaner top filling; this port fits a variety of bottle nib sizes. The Scion 2 has a 24mm diameter and fully controllable bottom airflow for an increased or restricted inhale.

The newly designed Plexus Coil offers increased flavour and cloud production, thanks to it’s 0.15 Ohm resistance. What sets these coils apart is the new coil structure and the use of mesh, rather than traditional wound coil wire. The mesh allows for a faster and more even heat, this combined with the new cotton increases the overall lifespan of the Plexus Vape Coil.

Contains:

  • 1 x Proton MOD
  • 1 x Scion II tank(0.36ohm installed)
  • 1 x Plexus coil 0.15ohm
  • 1 x Spare Glass Tube
  • 1 x Extra Drip Tip
  • 1 x USB Charging Cable
  • 1 x Spare O-rings Set
  • 1 x Vape Band
  • 1 x User Packet

Features:

  • 235W Output
  • Dual 18650 Batteries Required
  • Full Colour Screen
  • Custom Chipset
  • Multiple Output Modes
  • 2ml Fill Capacity Tank
  • Top Fill
  • Innovative Plexus Coils

Important Note About Sub Ohm Vaping:

This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

£69.99
VAPORESSO REVENGER X 220W TOUCH SCREEN VAPE KIT

The Vaporesso Revenger X Vape Kit takes a lot of the design and plus points of its predecessor, this time instilling a touch screen onto the device for a more modern edge. The kit has a maximum output of 220W, and is powered by dual 18650 batteries. The Revenger X comes with Vaporesso's NRG 2ml tank, which takes Sub Ohm coils.

Contains:

  • 1 x Vaporesso Revenger X 220W Mod
  • 1 x Vaporesso NRG Tank
  • 1 x GT4 Coil
  • 1 x GT8 Coil
  • 1 x Replacement Glass Tube
  • 1 x User Manual
  • 1 x USB Cable

Features:

  • Size: 45mm*89mm*28mm
  • Display: 0.96” OLED
  • Brightness: 16 tier adjustment
  • Button: 1 physical fire button, 3 responsive touch button
  • Haptic Pattern: mobile-specific vibration motor
  • Sensory accommodation: 8 tier vibration adjustment
  • Startup speed: <0.1S
  • Temperature Control Range: 100-315/200F-600F
  • Output Modes: VW(H/N/S), CCW, CCT, 

Important Note About Sub Ohm Vaping:

This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

£64.99
ASPIRE PUXOS 21700 VAPE KIT

The Aspire Puxos is a sub ohm vape kit, with a maximum 100W output or 80W output dependent on which vape battery you use. The kit comes with a 21700 vape battery, it can also utilise either a 18650 or 20700 battery (sold separately). Also included is the Cleito Pro Tank, with a 2ml capacity and upgraded top fill function. Please note, this kit is intended for advanced users only.

The Puxos has a striking appearance, thanks to it’s two panel design - available in a range of colour schemes there’s a look for everyone. The panels are interchangeable with multiple designs available to purchase separately. A combination of lightweight plastics throughout the Puxos’ construction make it easy to carry around and use, while remaining sturdy.

An easy to navigate interface is displayed on a 0.96 OLED Screen, this interface gives the user access to the multiple output modes. Located above the screen is the fire button, below the screen are the menu control buttons. Customisation is a key part of the Puxos, this is especially true of the available modes. As well as standard Variable Wattage, Temperature Control and Variable Voltage, advanced output functions are accessible.

The advanced function include: Bypass Mode which allows the Puxos to fire at the maximum wattage the battery will allow, much like an unregulated device. Customisable Power Settings or CPS Mode allows the user to programme wattage presets for the device to fire at sequentially, for a truly unique experience. 

The Aspire Cleito Pro tank is a 2ml sub ohm tank, that’s been designed for cloud chasing and increased flavour. A newly designed top fill allows the Cleito Pro vape tank to be filled without unscrewing the top, a ring just underneath the drip tip can be taken off revealing a side filling port. 

Triple adjustable airflow is located at the bottom of the tank, means that the inhale can be configured to your choosing. There are a variety of coil options available for the Cleito Pro, there are 0.5 Ohm coils included in the kit; however it’s also compatible with the 0.2 and 0.4 Ohm standard Cleito Coils, or the 0.16 Ohm Cleito Exo Coils.

Contains:

  • 1 x Puxos Mod
  • 1 x Cleito Pro Tank
  • 1 x 21700 Battery
  • 2 x 0.5 Ohm Coils (one pre-installed)
  • 1 x User Manual
  • 1 x USB Charging Cable
  • 1 x Spares Bag

Features:

  • 80W / 100W Output
  • Requires Single 18650 / 20700 / 21700 Battery
  • Interchangeable Panels
  • Multiple Output Modes
  • 2ml Tank
  • Slide Top Fill
  • Multiple Coil Options
  • Triple Bottom Airflow

Important information about Sub Ohm vaping:

This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

£64.99
SMOK DEVILKIN 225W VAPE KIT

The Smok Devilkin Vape Kit has a 225W maximum output, is powered by dual 18650 vape batteriesand includes the TFV12 Prince vape tank as well. The device has a 1.3 inch TFT HD screen combined with a new operation interface that displays data clearly, including output modes such as VW (Variable Wattage) Mode, TC (Temperature Control) Mode and other useful information. The screen has multiple colour settings allowing the user to customise the device their personal preference. 

The Smok Devilkin has an ergonomic design, small radians in the middle of the body provide improved grip and comfort levels. It also has a large lateral fire button for easy operation, for those after sharp looks, the back of the device has a snake pattern blade which matches that of the drip tip. The Smok Devilkin has upgradeable firmware and mutliple protections including intelligent atomiser recognition, 10 second cut off and short circuit protection.

The TFV12 Prince vape tank has a 2ml capacity and the cobra drip tips provide increased airflow. The top fill system has a patented locking system, which ensures no accidental openings and leakage. The kit includes V12 Prince Vape Coils; a Q4 0.4 Ohm Quadruple coil and Prince T-10 0.12 Ohm Decuple coil.

Contains:

  • 1 x Smok Devilkin Mod
  • 1 x TFV12 Prince Tank
  • 1 x V12 Prince Q4 0.4 Ohm Quadruple Coil (pre-installed)
  • 1 x V12 T10 0.12 Ohm Decuple Coil
  • 1 x USB Cable
  • 1 x User Manual
  • 1 x Spare Parts Bag

Features:

Devilkin Mod

  • 225W Output
  • Dual 18650 Batteries Required (sold separately)
  • Variable Wattage / Temperature Control
  • 1.3 Inch TFT HD Screen
  • Upgradeable Firmware

TFV12 Prince Vape Tank

  • 2ml Capacity
  • Cobra Drip Tip
  • Patented Locking Mechanism
  • Top Refill

Important information about Sub Ohm vaping:

This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements, and that your mod can handle the amps.

We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

£59.99
JOYETECH ESPION PROCORE X 200W VAPE KIT

The Joyetech Espion ProCore X Vape Kit features a 200w output, powered by dual 18650 vape batteries. The Espion has a large 1.45 inch TFT colour screen with a friendly user interface, with the inclusion of a function button allowing for the screen to be easliy switched off when not in use.

The kit comes with a ProCore X vape tank which takes the Joyetech Pro C1 coils, with options for both 0.25Ω and 0.4Ω; ideal for cloud production. The Espion offers both wattage and TC modes, upgradeable via firmware from the Joyetech website.

Contains

  • 1 x Joyetech Espion Mod
  • 1 x Joyetech ProCore X Tank
  • 2 x ProC Coils
  • 1 x Bag of Spare parts
  • 1 x USB Cable
  • 2 x User Manuals

Features:

ProCore X Tank

  • 2ml Capacity
  • Top Filling

Espion Mod

  • 200w Output
  • Dual 18650 batteries required
  • Output Modes: VW / RTC /TC-Ni / TC-Ti / TC-SS/ TCR
  • 315C / 600F Maximum TC Output
  • Large 1.45 inch colour screen

Important Information About Sub Ohm Vaping:

This device is designed for sub-ohm vaping. It requires more vaping experience to use safely and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

We also advise not use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

ELEAF ISTICK PICO S 21700 VAPE KIT (BATTERY INCLUDED)

The Eleaf iStick Pico S is a sub ohm vape kit, with a maximum 100W output, powered by either a 21700 battery (included with the kit) or a single 18650 battery (sold separately). This compact device comes complete with the Ello Vate sub ohm tank, that features a 2ml capacity and custom coils. This kit recommended for advanced users.

The Pico S Mod has a slim profile compared to other similar vape devices, for a bold aesthetic LEDs have been installed with customisable colour options. A dedicated battery cylinder fits either a 21700 or 18650 battery and can be quickly unscrewed and firmly refitted to avoid battery rattle. A OLED screen clearly displays output and important information. Directly above the screen, control keys and a chunky firing button can be found.

With standard VW (Variable Wattage) Mode and TC (Temperature Control) Mode available to choose from; the Pico S is compatible with a range of vape coils. In TC mode the user also has the option of Memory Mode, where programmable presets can be entered and selected for a custom vaping experience. A short ramp up time of below 0.3 seconds is achieved thanks to the new Eleaf Chipset.

The Ello Vate tank has been designed for sub ohm vaping. A secure sliding top-fill mechanism makes refilling the tank quick and clean, adjustable triple airflow allows for increased clouds and flavour. With cloud chasing in mind two coil options are available for the Ello Vate tank, both featuring a low resistance of 0.15 Ohm and 0.2 Ohm.

Contains:

  • 1 x Eleaf iStick Pico S Mod
  • 1 x Eleaf Ello Vate Tank
  • 1 x 0.15 Ohm Coil (pre-installed)
  • 1 x 0.2 Ohm Coil
  • 1 x Spares Kit
  • 1 x 18650 Adaptor
  • 1 x 21700 Battery

Features:

  • 100W Output
  • Requires single 18650 or 21700 battery
  • Variable Wattage Mode
  • Temperature Control Mode
  • OLED Screen
  • 2ml Tank
  • Top-Fill
  • Triple Airflow

Important Note About Sub Ohm Vaping:

This vape device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomizers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

£59.99
UWELL IRONFIST 200W VAPE STARTER KIT

The Uwell Ironfist Kit is a hard hitting combo of the Uwell Ironfist mod and Uwell Crown 3 tank. With a maximum 200W output and powered by dual 18650 vape batteries (sold separately) the Ironfist is robust and is paired with the 24.5mm Crown 3 Tank which has a 2ml capacity and handy top filling.

The Ironfist has a zinc alloy construction, A genuine leather grip and a large fire button. Rather than the standard five-click on/off function there is a power switch located at the base of the device.

The Ironfist really stands out in terms of function thanks to the different output modes available. The mod features standard VW (Variable Wattage) Mode, TC (Temperature Control) Mode and Bypass Mode.

Bypass Mode allows the Ironfist to act like a mechanical mod, by firing the mod at the maximum wattage that the battery will allow. Yet still providing the same protections to the battery, atomiser and user that a regulated mod allows for.

The Crown 3 has a sleek aesthetic and has been designed for maximising airflow and draw thereby increasing flavour and cloud production. There is a fully adjustable triple airflow at the bottom of the tank.

The parallel coil structure and three large wicking slots on each Crown 3 Coil means improved saturation, increased juice flow and a reduction in dry hits. What’s more, these are plug and pull coils, a threadless design means removal and installation is simple and clean.

Filling the Crown 3 is quick and clean due to the anti-leak top filling on this vape tank, the threaded top cap is well machined and easy to remove, revealing large dual 6mm juice ports that fit most eliquid bottle nibs.

Contains:

  • 1 x Ironfist Mod
  • 1 x Crown 3 Tank
  • 1 x 0.25 Ohm Coil (pre-installed)
  • 1 x 0.4 Ohm Coil
  • 1 x Spares Kit
  • 1 x USB Charging Cable
  • 1 x User Manual
  • 1 x Crown Key
  • 1 x Drip Tip Cover

Features:

  • 200W Output
  • Requires Dual 18650 Batteries
  • Genuine Leather Grip
  • VW Mode, TC Mode and Bypass Mode
  • 2ml Capacity
  • Top Fill
  • Adjustable Triple Airflow
  • Plug and Pull Coils
  • Anti-Leak

Important Information About Sub Ohm Vaping:

This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps

£59.99
ELEAF ISTICK PICO 21700 VAPE KIT (BATTERY INCLUDED)

The eLeaf Pico 21700 Vape Kit features a 100w output, it can use both 21700 and 18650 batteries. It comes supplied with a 21700 battery which you can expect great battery life with its 4000mAH capacity. The Pico has 0.91 inch screen which displays all relevant information  such as remaining battery life and power or temperature settings.

The eLeaf Pico 21700 is supplied with the eLeaf Ello Tank which with its wide open airflow and wide bore drip tip is designed for large clouds of vapour. This 2ml is designed for those vapours who like a direct to lung inhale.

Contains:

  • 1 x iStick Pico 21700
  • 1 x Ello Tank
  • 1 x 21700 Battery
  • 2 x HW Atomizer Heads
  • 1 x USB Cable
  • 2 x User Manuals

Features:

Eleaf Ello Tank:

  • 2ml Capacity
  • Adjustable Airflow
  • Top Refill
  • 25mm Diameter

iStick Pico 21700:

  • 100w Output
  • Output Modes: VW / Bypass / TC-Ni / TC-Ti / TC-SS
  • 315C / 600F Maximum TC Ouput
  • Requires 1x 21700 Battery (supplied) or 1 x 18650 Battery (sold separately)

    Important Information About Sub Ohm Vaping:

    This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

    We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

    £49.99
    WISMEC LUXOTIC BF BOX VAPE KIT

    The Wismec Luxotic BF Box Vape Kit is another collaboration between the top tier vaping company and their resident designer Jay-Bo.

    The Luxotic works like a mechanical mod but has power limiting protection built in, meaning that it has the features of a Mech Mod, but with the safety features of a Regulated Mod.

    The Luxotic BF Box Kit is complemented by Wismec's Tobhino BF RDA, which comes with a prebuilt 0.18Ω Clapton coil as well as being wicked with cotton. It has quite a small deck, so can only really be used with single coil builds.

    All a user needs to do is fill the tank, prime the coil, and it's ready to go, with the Luxotic intended to be a "ready-to-vape" package. It's ideal for those looking to get into rebuildables and squonk vaping.

    Please Note: The Blue edition of this mod has a Resin finish, and as such, individual units may have slight variations in pattern and colour. Please get in touch with us if you would like to inquire further.

    Contains:

    • 1 x Wismec Luxotic BF Box
    • 1 x Wismec Tobhino BF RDA
    • 1 x 7.5ml Squonk Bottle
    • 2 x 0.18Ω Clapton Coil
    • 1 x Cotton (Prewicked)
    • 1 x 810 Top Cap
    • 2 x User Manual
    • 1 x Warning Card
    • 1 x Bag of Spares

    Features:

    • 7.5ml Squonk Bottle
    • 100W Max Output
    • Adjustable Airflow
    • Pre Wicked Coils

    Important information about Rebuildable Dripping Atomisers:

    This product is designed for experienced users, and for those possessing an ohms reader or multimeter to test their coils on. This device requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law.

    We don’t advise any beginners to start rebuilding coils without speaking to a knowledgeable shop. A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

    £49.99
    SMOK T-PRIV 3 VAPE KIT

    The Smok T-Priv 3 Kit features a 300W mod along with Smok's TFV12 Prince Sub Ohm Tank. Smok have decided to skip past '2' and go straight to '3', presumably due to its ability to take Triple 18650 vape batteries for power.

    The T-PRIV 3 has a maximum power output of 300W, which should be enough watts for 99.9% of vapers out there. The side of the mod is adorned with LED light strips, customisable in a variety of 9 different colours, with a bright OLED screen displaying all necessary user information.

    The TFV12 Prince Vape Tank features a newly-designed Crown body, constructed of high-quality stainless steel, with the tank section made from heat-resistant pyrex glass. The colourful Cobra drip tips included with the tank are constructed of resin, and feature a unique snake-skin design.

    Included with the kit are two TFV12 Prince Vape Coils; a 0.4Ω Quadruple and a super-charged 0.12Ω Decuple coil.

    Contains: 

    • 1 x Smok T-PRIV 3 Mod
    • 1 x Smok TFV12 Prince Vape Tank
    • 1 x V12 Prince Q4 0.4Ω Coil
    • 1 x V12 Prince T10 0.12Ω Coil
    • 1 x USB Cable
    • 1 x User Manual
    • 1 x Bag of Spare Parts

    Features:

    T-PRIV 3 Mod

    • Triple 18650 Batteries Required
    • 300W Max Output
    • Customisable LED Lights
    • Ergonomically Designed Fire Key
    • OLED Screen

    TFV12 Prince Tank

    • 2ml Capacity
    • Stainless Steel 
    • Pyrex Glass
    • Cobra Resin Drip Tip
    • Redesigned Crown Body

    Important Note About Sub Ohm Vaping:

    This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

    We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

    £49.99
    VAPORESSO SWAG VAPE KIT

    The Vaporesso Swag Kit is a compact 18650 vape device featuring an 80W output along with an upgradable OMNI 2.0 chip and a 2A fast charging capabilities. Vaporesso’s NRG SE Tank has a 2ml capacity along with a twist-open design and an adjustable bottom airflow system.

    The Swag kit supports standard Variable Voltage and Temperature Controls modes, with options for TCR, Bybass, and other additional modes.

    Contains:

    • 1 x Vaporesso 80W Swag Kit
    • 1 x GT Core
    • 1 x GT CCELL
    • 1 x Replacement Glass Tube
    • 1 x User Manual
    • 1 x USB Cable

    Features:

    • 80W Output
    • 2ml Capacity
    • Output Modes: VW(H/N/S), CCW, CCT, VT(NI,TI,SS), TCR(M1,M2), RTC, BYPASS
    • Requires 18650 Battery
    • Aluminum Alloy Construction

    Important Note About Sub Ohm Vaping:

    This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

    We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

    £44.99

    Top

    Panel Tool
    Float header
    Float topbar
    Default Boxed Large Boxed Medium
    Header Default Header One