VAPE KITS WITH INTEGRATED BATTERIES

SMOK X PRIV BABY TFV12 VAPE STARTER KIT

The Smok X Priv Baby Kit is a compact sub ohm vape kit with a HD screen; it features a built in 2300mAh battery, USB charging and an 80W maximum output. The kit comes complete with the Smok TFV12 Baby Prince tank, with a 2ml eliquid capacity. This sub ohm vape kit is intended for advanced users only.

The X Priv Baby Kit has based it’s design on the original X Priv Kit. While smaller than the original it features a redeveloped user interface, an edge-to-edge screen takes up one panel of the device. This 2 inch HD screen clearly displays output modes and key information. Two menu keys sit at the bottom of the screen, with a large lateral fire key located on the side of the mod.

This vape device can be charged via USB, firmware can also be upgraded using the same cable. Multiple output modes make the X Priv a device that can be configured to different vaping styes. VW Mode (Variable Wattage Mode) allows for control of the wattage output. TC Mode (Temperature Control Mode) allows for control of the heating levels and for multiple vape coil types to be used.

The TFV12 Baby Prince Tank features a new childproof filling mechanism, that increases safety and prevents accidental opening; this is coupled with durable construction and a 2ml fill capacity. This vape tank has been designed for sub ohm vaping promoting cleaner flavour and increased clouds.

The Smok Q2 coils feature 0.4 ohm resistance making them ideal for direct to lung vaping, a redesigned style of coil fitting allows them to be installed and removed easily. 

Contains:

  • 1 x Smok X Priv Baby Mod
  • 1 x Smok TFV12 Baby Prince Tank
  • 1 x USB Charging Cable
  • 2 x Q2 Coils
  • 1 x Spares Kit
  • 1 x User Manual

Features:

  • 2300mAh Battery
  • 2 Inch HD Screen
  • 80W Max Output
  • Redesigned User Interface
  • Variable Wattage Mode
  • Temperature Control Mode
  • 2ml Tank
  • Childproof Lock

Important Information about Sub Ohm Vaping:

This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

£49.99
HANGSEN TURBO VAPE STARTER KIT

The Hangsen Turbo Kit is a vape starter kit that is sleek, compact and easy to use. With a built in 650mAh battery and a 1.8ml capacity tank, this is a device intended for new users and existing vapers looking for a simple to use.

With a clean aesthetic the Turbo Kit works as well as it looks. Featuring a one button operation with a fixed wattage output, five clicks will turn the device on and off. Once filled with eliquid it can be used straight away.

The Turbo Tank has a 1.8ml fill capacity and is bottom fill, a restricted airflow provides a tight inhale allowing for mouth to lung vaping. There are two coil options available - 1.3 Ohm resistance, that provides increased cloud and a 2.8 Ohm resistance coil that has been geared towards increased flavour.

The Hangsen Turbo can be charged directly via the USB slot and includes a childproof locking mechanism to stop the tank from opening unintentionally. With safety in mind, the device also has Short Circuit and Low Voltage Protection.

Contains:

  • 1 x Hangsen Turbo Kit
  • 1 x 1.3 Ohm Coil
  • 1 x 2.8 Ohm Coil
  • 1 x USB Charging Cable
  • 1 x User Manual

Features:

  • 650mAh Battery
  • 1.8ml Tank
  • Child Lock Tank
  • USB Charging
£19.99
SMOK V-FIN 8000MAH 160W VAPE KIT

The Smok V-Fin is a sub ohm vape kit, powered by a built in 8000mAh battery it boasts an impressive 160W max output. The kit comes complete with the TFV12 Big Baby Prince Tank, with a 2ml fill capacity and adjustable bottom airflow. This kit is intended for advanced users only.

The V-Fin is a robust vape mod, with a lateral fire key taking up one side of the device. A mounted OLED screen is located at the top of the device, that clearly displays output information, battery life and more. The battery can be charged via USB, with the included cable. The V-Fin features upgradeable firmware and safeguards including short circuit protection, 12 second cutoff and overheating protection.

Multiple output modes make the V-Fin a device that can be configured to different vaping styles. VW Mode (Variable Wattage Mode) allows for control of the wattage output. TC Mode (Temperature Control Mode) allows for control of the heating levels and for multiple vape coil types to be used. This device also has a Memory Mode, that allows you to programme in custom outputs.

The TFV12 Big Baby Prince Tank has been designed for cloud chasing and intense flavour, with a 2ml fill capacity. This sub ohm vape tank features a new childproof filling mechanism, that increases safety and prevents accidental opening. There are two coil options available with this tank; the Q4 coil has a 0.4 Ohm resistance and the T10 coil has a 0.15 Ohm resistance. 

Contains:

  • 1 x Smok V-FIN 8000mAh Mod
  • 1 x TFV12 Big Baby Prince Tank
  • 1 x V8 Baby-Q4 0.4Ω Coil
  • 1 x V8 Baby-T8 0.15Ω Coil
  • 1 x USB Cable
  • 1 x User Manual
  • 1 x Bag of Spares

Features:

  • 8000mAh internal battery
  • 160w output
  • Temperature modes
  • HD Led Screen
  • 2ml Capacity
  • Adjustable Airflow
  • Top Refill

Important information about Sub Ohm vaping:

This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements, and that your mod can handle the amps.

We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

£59.99
WISMEC SINUOUS SW VAPE KIT

The Wismec Sinous SW Kit is a high-quality pen-style device that features a huge 3000mAh battery with a maximum output of 50W. It's a great first upgrade for those who enjoy the shape and feel of a tube-styled vape mod.

The Sinuous SW battery is paired with Wismec's top-filling Elabo SW tank create an eye-catching combination to satisfy vapers looking for both looks and performance. 

Contains:

  • 1 x Wismec Sinuous SW Battery
  • 1 x Wismec Elabo SW Tank
  • 2 x WS01 0.2 Ohm Coils
  • 1 x Glass Tube
  • 1 x USB Cable
  • 1 x User Manual
  • Spare Parts

Features:

  • 3000mAh Built In Battery
  • 50W Maximum Output
  • 2ml Capacity Tank
  • Top Fill
  • USB Charging
  • Metal Shell

Important Information About Sub Ohm Vaping

This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

£49.99
VAPORESSO REVENGER MINI 85W VAPE KIT

The Vaporesso Revenger Mini Kit continues the legacy of the series, containing Vaporesso’s patented OMNI Board 2.2 chipset allowing for a multitude of modes and an 85W Max output.

The kit has a 2500mAh built-in battery, managing to squeeze such a large capacity into relatively compact dimensions. Equipped with the Revenger Mini Mod is Vaporesso’s NRG tank, which utilizes the GT Core series of coils.

Contains:

  • 1 x Vaporesso Revenger Mini 85W Mod
  • 1 x Vaporesso NRG Tank
  • 2 x GT Core Replacement Coils
  • 1 x Replacement Glass
  • 1 x USB Charging Cable
  • 1 x User Manual

Specifications:

  • Voltage Range: 0V-8.5V
  • Resistance Range: 0.05-5Ω
  • Temperatue Control Range:100°C-315°C/200F-600F
  • Output Modes: Smart VW(H/N/S), CCW, CCT, VT(NI,TI,SS), TCR(M1,M2), RCT, BYPASS

Important Note About Sub Ohm Vaping:

This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

£54.99
SMOK MAG BABY 50W VAPE STARTER KIT

The Smok Mag Baby Vape Starter Kit is a small and compact device that features a 16mAh integrated battery, along with Smok's TFV12 Baby Prince tank. The Mag Baby takes the design aesthetics of it's larger cousin, the full-size Mag Kit, and compacts them down to mini proportions; it's the underpants Deringer of the Smok arsenal, if you will.

A 50W max output ensures the battery won't run down too quickly, and an bright OLED screen (even on mod of this size) clearly displays all necessary user information. The Mag Baby Kit comes with a 0.6Ω Q2 coil, and a 0.25Ω M2; both designed for maximum cloud and flavour.

Please Note: Images are for aesthetic illustration purposes only, this kit does not come with bubble glass, as it is unfortunately not TPD compliant.

Contains:

  • 1 x Smok Mag Baby Mod
  • 1 x TFV12 Baby Prince Vape Tank
  • 1 x V8-Q2 Baby 0.4Ω Coil (preinstalled)
  • 1 x V8-M2 Baby 0.25Ω Coil (Spare)
  • 1 x USB Cable
  • 1 x Bag of Spare Parts

Features:

TFV12 Baby Prince Tank

  • 2ml Capacity
  • Childproof Fill Mechanism
  • Adjustable Bottom Airflow

Mag Baby 50W Mod

  • 1600mAh Battery
  • 50W Max Output
  • OLED Screen
  • Short Circuit Protection
  • Over Heating Protection
  • Low Voltage Protection

Important information about Sub Ohm vaping:

This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements, and that your mod can handle the amps.

We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

£49.99
INNOKIN KROMA-A ZENITH VAPE KIT

The Innokin Kroma-A Zenith Kit contains both a 75W TC capable vape mod, along with Innokin's Zenith Sub-ohm tank. It's a small and compact device that fits comfortably in hand, and also features a "grip" finish to help those with clumsy hands.

The Innokin Zenith Vape Tank is the result of a collaboration between vaping personalities Phil Bursardo and Dimitris Agrafiotis, along with manufacturer Innokin. The Zenith vape tank has a simple-to-use top-fill twist design that automatically shuts the liquid flow off when its being filled to prevent flooding of the coil.

The tank comes with both a 0.8Ω sub ohm coil, as well as a mouth-to-lung coil with a resistance of 1.6 ohms. Innokin Zenith Vape Coils are available to buy separately in packs of five.

Powered by Innokin's Aethon chipset to reduce dry hits, the Kroma A does away with the recessed 510 connector from the previous model, instead featuring a flush 510 connector ensuring most vape tanks will sit on top with ease.

Contains:

  • 1 x iTaste Kroma-A 75W TC Mod
  • 1 x Innokin Zenith Tank
  • 1 x 1.6Ω Coil (pre-installed)
  • 1 x 0.8Ω Coil (Spare)
  • 1 x Micro USB Charging Cable
  • Spare O-rings

Features:

Innokin Zenith Tank:

  • 2ml Capacity
  • Pyrex Glass
  • Stainless Steel Construction

Innokin Kroma-A Mod:

  • Battery: 2000mAh Built-in 
  • Maximum Output: Up To 75W 
  • Charging: Micro USB 2A 
  • TC Mode: with Ni, Ti, SS316
  • Ultra Compact Design

    Important Note About Sub Ohm Vaping:

    This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

    We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

    £49.99
    ASPIRE ZELOS VAPE KIT

    The Aspire Zelos Kit is a compact and ergonomically designed vape kit, featuring a 50W mod along with Aspire's Nautilus 2 tank.

    The Zelos mod contains a 2500mAh battery, and features both Variable Wattage and Temperature Control capabilities.

    The Nautilus 2 Tank has a 2ml capacity and a top fill design, and is ideal for mouth-to-lung vapers with its high resistance 1.8Ω coil.

    Contains: 

    • 1 x Aspire Zelos Mod
    • 1 x Aspire Nautilus 2 Tank
    • 1 x 0.7Ω Nautilus Coil (pre-installed)
    • 1 x 1.8Ω Nautilus Coil (spare)
    • 1 x Spare Drip Tip
    • 1 x Spare Glass Tube
    • 1 x Micro USB cable

    Features:

    Aspire Nautilus 2 Tank

    • 2ml Capacity
    • Top Fill
    • Sub Ohm and Above Ohm Coil Options
    • Metal Sleeve

    Aspire Zelos Mod

    • 2500mAh in-built battery
    • 50W Max Output
    • Variable Wattage
    • Temperature Control

    Important Information About Sub Ohm Vaping

    This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

    We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

    £49.99
    VAPORESSO CASCADE ONE PLUS VAPE STARTER KIT

    The Vaporesso Cascade One Plus vape kit is a vape pen style kit with serious power. A combination of the 2ml Cascade tank and a 3000mAh battery mod provides the users with an easy to use device that offers increased cloud and flavour - thanks to the sub ohm tank. This kit is intended for advanced users.

    The Vaporesso Cascade Baby Tank has a capacity of 2ml, and is ideal for sub ohm vaping with its low resistance vape coils. As you’d expect from Vaporesso this is a well-machined piece of hardware that is easily disassembled and clean, with a reverse threading to reduce over-tightening.

    The Cascade Tank pioneers the new Isolation Tank Structure. This structure reduces the amount of dry hits and increases flavour intensity by ensuring the cotton in your coil is always wicked when your tank is full and increases the lifespan of your coils.

    With sub ohm vaping and cloud chasing in mind, the Vaporesso Cascade features unique triangular airflow from three separate airflow holes, which are adjustable so you can find your ideal inhale.

    The 3000mAh battery mod has a large power button and LED display to indicate battery life. The sleek body design makes the One Plus an attractive and hardworking piece of hardware. There is no screen or adjustable function with this device meaning it’s simple to operate and can be used straight out of the box.

    Please Note: Due to the design of the isolation structure, this tank features a reverse threading to reduce over-tightening.

    Contains:

    • 1 × Cascade One Plus 3000mAh Battery
    • 1 × Cascade Baby Tank
    • 1 × GT Mesh Coil 0.18Ω
    • 1 × GT CCELL2 Coil 0.3 Ohm
    • 1 × USB Charging Cable
    • 1 × User Manual

    Features:

    • 3000mAh Battery
    • 2ml Tank
    • Top Fill
    • Range of Coils
    • Compact Design

    Important information about Sub Ohm Vaping:

    These coils are designed for sub-ohm vaping. They require more vaping experience to use safely, and extra care should be taken when using a sub ohm tank and mod. The coils will only work on a mod capable of firing sub ohm atomisers. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps. 

    We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken

    £39.99
    MI-ONE AIO VAPE STARTER KIT

    The Mi-One is a pocket sized AIO (All In One) vape kit, from the makers of the Mi-Pod. This is one seriously compact device, with a 2ml capacity and one-button operation it is ideal for new users and vapers looking to move towards a discrete device.

    The built in 1100mAh battery gives the Mi-One superior battery life to keep you vaping for longer, the device is top filling as well as anti-leak meaning it travels very well. While this device has a fixed wattage it also uses sub ohm coils and features adjustable airflow; making it compatible with a range of eliquids, allowing you to tailor your vaping experience.

    Overall, the Mi-One is a device that should not be overlooked. By combining bold aesthetics, quick set-up and an impressive sized battery - this is truly a kit for the vaper on the go.

    Contains:

    • 1 x Mi-One AIO Kit
    • 2 x 0.6 Ohm Coils
    • 1 x Charging Cable
    • 1 x User Manual

    Features:

    • 1100mAh battery
    • Top Fill
    • Anti-Leak
    • Compact
    • One Button Operation 
    TECC ARC 5 VAPE STARTER KIT

    The TECC Arc 5 is a small compact kit which its design inspiration from the eLeaf iStick. The mod has a maximum 40 watt output and a 2200mAH battery which should see most vapers through a day or two. The Arc 4 has short circuit protection and 5 click on and off mechanism to help keep you safe whilst vaping.

    The Arc 5 has pass-through technology allowing you to continue vaping whilst the device is charging, there is also an OLED screen which displays relevant information such as battery life which also has a stealth mode for when you wish to vape incognito.

    The Arc 5 now includes the CS Air Slim Tank which has a glass and stainless steel construction, a 2ml capacity and adjustable airflow. The tank has a bottom fill design which you can refill or change the coil whilst eLiquid remains in the tank.

    Contains:

    • 1 x TECC Arc 5 Battery
    • 1 x CS Air Slim Tank
    • 1 x CS Atomiser Head (Preinstalled)
    • 1 x USB Cable
    • 1 x User Manual

    Features:

    • Battery Capacity - 2200mAH
    • Output Wattage - Up to 40w
    • Tank Capacity  - 2ml
    • Atomiser Resistance - 1.5ohm
    £34.99
    SMOK RESA STICK VAPE KIT

    The Smok Resa Stick Vape Kit is a pen style device with a 2000mAh in-built battery and comes with Smok's Resa Baby vape tank.

    The Smok Resa has a cobra resin design on its body which gives a wild outlook and tactility to the device, the resin theme runs through the Resa Baby tank also. The Smok Resa has micro USB charging and an intelligent LED indicator for example it will flash 4 times on each puff or flash 15 times when the voltage is lower than 3.3V.

    The Resa Stick has various safety protection systems including 8 second cut off, short circuit protection, low resistance protection and low voltage protection.

    The Resa Baby vape tank has 2ml capacity, a cobra resin drip tip which brings increased airflow from the large adjustable air slots, there is also a top fill system for ease of use. The Resa Baby includes a new mesh style coil, the mesh increases the heating area which provides a faster heating process and massive vapour production.

    Contains:

    • 1 x Resa Vape Stick
    • 1 x Resa Baby Tank
    • 1 x V8 Baby-Mesh Coil 0.15ohm (pre-installed)
    • 1 x V8 Baby-M2 (0.25ohm Dual Coils)
    • 1 x USB Cable
    • 1 x User Manual
    • Spare Parts

    Features:

    • 2000mAh battery
    • Cobra Resin Design
    • Intelligent LED Indicator
    • Adjustable Airflow
    • Top Filling
    • Mesh Coil

    Important Information About Sub Ohm Vaping:

    This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

    We also advise not to use any e-liquid with more than 6mg of nicotine for sub ohming, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

    JACVAPOUR SERIES S22 VAPE KIT

    The JACVapour Series S22 Vape Starter Kit is a compact vape kit that manages to squeeze a huge 2600mAh battery capacity into a slim and slender size.

    Its battery capacity should easily last the average vaper most of the day, and the top-filling 2ml S22 tank is designed to be filled as quickly and easily as possible, utilising JACVapour's S-Coil series. 

    Contains:

    • 1 x Series S22 Mod
    • 1 x Series S22 Tank
    • 1 x S22 1.0Ω Coil
    • 1 x USB Cable
    • 1 x User Manual

    Features:

    • 2600mAh Battery 
    • Top Fill Tank
    • Mouth to Lung & Direct to Lung
    • Compact Size
    • USB Charging
    £34.99
    INNOKIN RIPTIDE COMPLETE VAPING KIT

    The Innokin RipTide Crios Vape Kit features both a 3000mAh integrated battery along with Innokin's Crios Sub Ohm Vape Tank. It's a pen-style device that has a constant fixed wattage output, meaning it will fire at its max setting until the battery drains down.

    The RipTide has a soft-touch rubber finish, and is firmly a sub-ohm vape device with its 0.25Ω coils; one installed in the tank, and one spare in the box. Alternatively, 0.65Ω coils are available to purchase seperately.

    The 3000mAh battery can be charged via the supplied USB cable, and will provide the average vaper with about a days consistent vaping.

    Contains:

    • 1 x Innokin RipTide 3000mAh Battery
    • 1 x Innokin Crios 2ml Tank
    • 2 x 0.25Ω Crios Coil (1 x Preinstalled, 1 x Spare)
    • 1 x Micro USB Cable
    • 1 x Quick Start Guide

    Specifications:

    • 3000mAh Integrated Battery
    • 2ml Crios Tank
    • Rubberised Soft Finish
    • Fixed Wattage Output

    Important information about Sub Ohm vaping:

    This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements, and that your mod can handle the amps.

    We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

    £34.99
    INNOKIN EZ.WATT VAPE STARTER KIT

    Innokin Ez.Watt Starter Kit is perfect for those starting out on their vaping journey. Made with simplicity in mind it is small and light. It has a built-in 1500mAh battery that can be charged via an included micro USB cable allowing it to be used all day.

    The EZ.Watt is a great start to use mainly for mouth to lung vaping with a spare Prism S Coil (1.5 ohm). If you want to dabble into sub ohming you can by simply cycling through three optimized wattage levels (13-14, 15-18, and for sub ohming 30-35) indicated by a three-color LED light. Please make sure you have the preinstalled 0.8ohm coil in the tank before using the sub ohm option.

    Contents

    • 1 x EZ.WATT Mod
    • 1 x Prism T20S Tank (0.8ohm)
    • 1 x Spare Prism S Coil (1.5 ohm)
    • 1 x Spare Drip Tip
    • 1 x Quick Start Guide
    • 1 x Micro USB Charging Cable
    • 1 x User Packet

    Features

    • Operating Wattage: 13W-35W
    • Battery Capacity: 1500mAH
    • Maximum Output Current:13.5A
    • Maximum Output Voltage: 7.5V
    • Clearomizer Resistance: 0.2 Ohm (min.)
    • Charging: Micro USB DC 5V/1A
    • Tank: 2ml Top-fill

    important Information About Sub Ohm Vaping

    This device is (partially) designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

    We also advise not to use any e-liquid with more than 6mg of nicotine for sub ohming, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

    £34.99
    ASPIRE K4 STARTER VAPE KIT

    The Aspire K4 is a complete vape kit that is made up of the Aspire K4 2000mAh battery and the Aspire Cleito tank. The Aspire Cleito features a 2ml capacity and is compatible with the whole range of Cleito coils and comes packaged with a 0.27 Ohm Cleito Clapton coil.

    The K4 Battery is a powerful and simple device that is operated with a single button. The K4 Battery can be charged via micro USB.

    Contains:

    • 1 x Aspire K4 Battery
    • 1 x Aspire Cleito Tank
    • 1 x 0.27 Ohm Cleito Coil (Preinstalled)
    • 1 x 0.27 Ohm Cleito Coil
    • 1 x Cleito Cuff
    • Micro USB Charging Cable

    Features:

    • 2ml Capacity Tank
    • 2000mAh Built-In Battery
    • One Button Operation
    • USB Charging

    Important information about Sub Ohm vaping:

    This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

    We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

    £34.99
    WISMEC HI-FLASK ALL-IN-ONE VAPE STARTER KIT

    The Wismec Hi Flask is an AIO (All In One) vape device. Powered by a built in 2100mAh battery and featuring a 2ml capacity, this regulated vape kit has been designed for new users and experienced vapers looking for an easy to use mouth to lung device. 

    A combination of a lightweight build and ergonomic shape, makes the Hi Flask a vape that fits well in the hand, and can be used on the go. The 2100mAh battery will allow for a full day’s vaping between charging, with an LED indicating battery life. When the time comes, the Hi Flask can be recharged via USB from a wall outlet or computer.  

    This Wismec Kit has a one button operation and a fixed wattage output of 40W, five clicks turns the device on and off, while switched on pushing the button will fire the device. An innovative cartridge system houses both the coil and eliquid, with an airflow control dial located on top. The cartridge will not need to be replaced once empty, simply refill with your choice of eliquid even salt nic eliquid.

    The 0.35 Ohm JVUA coils fit firmly into the cartridge, while being sub ohm coils they have been designed for mouth to lung vaping; the lower resistance helps promote better flavour and cloud. The JVUA vape coils use ceramic wicks rather than traditional cotton, providing a cleaner flavour and improved heating for a warm vape.

    Contains:

    • 1 x Wismec Hi Flask Device
    • 2 x 0.35 Ohm JVUA Coils
    • 1 x USB Charging Cable
    • 1 x User Manual

    Features:

    • All In One Device
    • 2100mAh Battery
    • Fixed Wattage Output
    • One Button Operation
    • 2ml Capacity
    • Ceramic Coils
    • Adjustable Airflow
    £32.99
    TECC ARC SLIM VAPE STARTER KIT

    The TECC Arc Slim is a small sized smarter kit, it is the most slender Arc device yet, at only 15mm wide it is both comfortable and extermely compact. The TECC Arc Slim comes with an Arc Slim Tank so that you can start vaping straight away, once the tank has been filled with eLiquid.

    The Arc Slim features a built-in 1800mAH battery, it has variable power setting which is presented in a user friendly way of low, medium or high, which are displayed on a screen at the top of the device.

    The CS Air Slim Tank is supplied in the kit. It has a 1.8ml capacity and comes with a 1.5 ohm coil with which we recommend you use a High PG Liquid for the best vaping experience. The tank uses TECC CS coils which are easily replaceable.

    Please Note: Due to the this device's 22W Max output, it cannot be used effectively with coils lower than 0.1Ω in resistance. We recommend the 1.2Ω CS coils.

    Contains:

    • 1 x TECC Slim Battery
    • 1 x CS Air Slim Tank
    • 1 x CS Atomizer Head
    • 1 x USB Cable
    • 2 x User Manuals
    • 1 x Spare Parts

    Features:

    • Battery Capacity - 1800mAH
    • Tank Capacity - 1.8ml
    • Atomizer Resistance - 1.5ohm / 0.750hm
    • Max Output - 22w
    £29.99
    SMOK STICK PRINCE TFV12 BABY VAPE STARTER KIT

    The Smok TFV12 Stick Prince Baby is a sub ohm vape kit. Designed in a pen style, the Stick Prince features one button operation and a 2000mAh built in battery that can be charged via USB. The kit comes complete with the TFV12 Baby Prince Tank with a 2ml eliquid capacity and adjustable airflow.

    The Stick Baby Prince offers a sub ohm vaping experience while remaining simple to use. A fixed wattage output means that there’s no set up necessary, five clicks of the button powers up the device, an LED acts as the battery indicator. A sleek aesthetic and relatively compact size means the Stick Baby Prince can be taken on the go.

    The TFV12 Baby Prince Tank features a 2ml capacity and a childproof top filling mechanism for increased safety and reduced leaking. This tank has been designed for cloud chasing and intense flavour, with a solid construction and adjustable bottom airflow. The Baby Prince Tank is compatible with a range of Smok vape coils, including the M2 0.25 Ohm coil and the 0.15 Ohm Mesh Coil.

    Contains:

    • 1 x Stick Prince Baby Prince
    • 1 x TFV12 Baby Prince Tank
    • 1 x V8-Mesh 0.15 Ohm Coil (pre-installed)
    • 1 x V8-M2 0.25 Ohm Coil
    • 1 x User Manual
    • 1 x Charging Cable

    Features:

    • 2000mAh Built In Battery
    • Fixed Wattage
    • One Button Operation
    • 2ml Tank
    • Bottom Airflow

    Important Information About Sub Ohm Vaping

    This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps

    £29.99
    ELEAF PICO BABY AIO VAPE STARTER KIT

    The Eleaf iStick Pico Baby Kit is a compact and stylish vape starter kit that’s very stealthy. With a 1050 mAh built in battery and simple operation the Pico Baby Kit has been designed for new users and experienced vapers looking for a smaller piece of hardware.

    The metal body is sturdy and scratch resistant, more importantly it’s pocket-sized making it easy to take on the go. The tank fits directly into the mod and is secured via a magnet, the 2ml GS Baby Tank has a detachable ring that when removed reveals a 510 pin allowing it to be used as a standard tank on other vape devices.

    The iStick Pico Baby has a simple one button operation and an inbuilt locking to stop it from firing accidentally. Five clicks turns the device on and off and the LED located at the side of the device acts as a battery life indicator. The device can be charged via the USB slot located at the side of the device.

    The GS Baby Tank has a fully adjustable airflow allowing for increased cloud and flavour or a restricted mouth to lung draw - making it ideal for vapers with different preferences; using 0.75 Ohm coils that are easy to fit and remove.

    Contains:

    • 1 x iStick Baby Mod
    • 1 x GS Baby Tank
    • 2 x 0.75 Ohm Coils
    • 1 x Magnetic Connector
    • 1 x USB Cable
    • 1 x User Manuals
    • 1 x Spare Parts Bag

    Features:

    • 1050mAh Battery
    • 2ml Tank
    • Magnetic Connector
    • One Button Operation
    • Adjustable Airflow
    £29.99
    ASPIRE K3 VAPE STARTER KIT

    The Aspire K3 Vape Starter Kit, is a vape kit designed for new users powered by a 1200mAh built in battery, that can be charged via USB. The kit comes complete with the Aspire K3 Tank, with a 2ml capacity and adjustable airflow - making it ideal for mouth to lung vaping.

    The K3 kit utilises a one button operation and fixed wattage output, meaning that there’s no set up necessary and it can be used straight away. Battery life is indicated by the mounted LED, the battery features Pass Through Charging, so the device can be safely used even when charging. 

    The Aspire K3 is an easy to use mouth to lung tank ideal for higher PG eliquids and eliquids with a high nicotine content. It uses Aspire BVC Coils that produce enhanced flavour and clouds. The tank is easy to disassemble and features bottom filling, that makes refilling clean and efficient.

    Contains:

    • 1 x Aspire K3 Mod
    • 1 x Aspire K3 Tank
    • 1 x 1.8 Ohm Coils
    • 1 x User Guide
    • 1 x USB Charging Cable

    Features:

    • 1200mAh Battery
    • Mouth To Lung Kit
    • One Button Operation
    • 2ml tank
    • Bottom Fill
    • Adjustable Airflow
    £29.99
    INNOKIN JEM VAPE STARTER KIT

    The Innokin Jem Vape Kit is a compact and easy-to-use kit, ideal for new vapers and those looking for a first device. The Jem mod contains a 1000mAh internal battery; enough to get a new vaper through the day. An easy adjustable wattage allows for five different increments ranging from 10W to 13.5W.

    The JEM tank features a 2ml capacity and uses a mouth-to-lung style 1.6Ω coil. It's convenient top-filling mechanism ensures refilling is as mess free as possible. It also features an adjustable airflow slot which allows the user to customise their vapour, with less or more air added to the mix.

    Contains:

    • 1 x Innokin JEM 2ml Vape Tank
    • 1 x Innokin JEM 1000mAh Battery Mod
    • 1 x Innokin JEM 1.6Ω Vape Coil
    • 1 x USB Charging Cable
    • 1 x Quick Start Guide

    Features:

    JEM Tank

    • 2ml Capacity
    • Top Fill
    • Adjustable Airflow
    • 1.6Ω Coil

    JEM Mod

    • 1000mAh Internal Battery
    • Compact Size
    • Adjustable Wattage in Five Increments
    £27.99
    JOYETECH EXCEED D19 VAPE STARTER KIT

    The Joyetech Exceed D19 Vape Kit is a slim and compact device that's great for new vapers as well as being a solid backup kit. It features a 1500mAh battery, along with a 2ml top-filling tank with an adjustable airflow.

    The mod features a ring LED to let the user know when the mod is being fired and when it's being charged. A handy USB port on the back allows for easy recharging via the supplied USB cable. The Exceed is both a Direct to Lung and a Mouth to Lung device, allowing for both a 0.5Ω Sub Ohm coil, as well as a 1.2Ω MTL coil.

    It also features options for both Direct Output and Constant Voltage Output. For those not in the know; Direct Output means the voltage slowly drops as the battery discharges, so the vapour production will decline slowly until it is depleted. On the other hand, Constant Voltage Outputensures the battery maintains a consistent voltage until it is depleted, so vapour production will remain at the same level until the battery reaches the point of discharge.

    Contains:

    • 1 x Joyetech Exceed D19 1500mAh Battery Mod
    • 1 x Joyetech Exceed D19 Tank
    • 1 x EX 0.5Ω DTL Coil
    • 1 x EX 1.2Ω MTL Coil
    • 1 x USB Cable
    • 2 x User Manual
    • 1 x Warranty Card
    • 1 x Bag of Spare Parts

    Features:

    • 1500mAh Battery
    • 2ml Tank
    • Top Fill
    • Adjustable Airflow

    Important information about Sub Ohm vaping:

    This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements, and that your mod can handle the amps.

    We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

    £26.99
    INNOKIN ENDURA T20-S VAPE STARTER KIT

    The Innokin Endura T20S Starter Kit is a thin and compact pen-style vape device that features Innokin's Prism-S tank along with a 1500mAh battery, rechargeable via the supplied USB cable.

    The Endura T20S takes Innokin's Prism S Coils only, coming with two 0.8Ω coils in the kit. The T20S cannot be used with the other Innokin coil ranges, only with the Prism-S coils. 

    Contains:

    • 1 x Innokin Endura T20S Mod
    • 1 x Innokin Prism T20S Tank
    • 2 x 0.8Ω Prism-S Coils
    • 1 x Spare Drip Tip
    • 1 x USB Charging Cable
    • 1 x User Manual
    • 1 x Warranty Card

    Features:

    • 2ml Capacity
    • 20mm Diameter
    • 1500mAh Built In Battery
    • USB Charging
    VAPORESSO NEXUS AIO VAPE STARTER KIT

    The Vaporesso Nexus is a compact and versatile AIO (All In One) vape device. It’s packed with features normally only seen on more upscale devices, powered by a built in 650mAh battery with a 2ml eliquid capacity. Designed for new users thanks to it’s easy operation, it should be considered by vapers of all levels looking for a discreet vape mod.

    A clean and smooth design sets the Nexus apart from a lot of the competition. It performs well enough to be used straight out of the box. Remove the top cap and plastic stopper and you’ll see the large juice port designed to fit a number of bottle sizes for quick filling. Unlike standard AIO devices, you do not need to remove the coil to fill the Nexus.

    Once the power button has been clicked five times the device is activated, and when the user inhales on the device vapour production will begin. Designed for higher PG eliquids it has a tight draw providing a mouth to lung vaping experience; this is combined with adjustable airflow to help you find your perfect inhale.

    The 650mAh battery has a long life and when it finally does run out, it can be quickly charged via the USB slot - with a reported charge time of forty minutes. The mounted LED advises the user of battery life based on the light colour. There are two choices of coil a Standard Coil and the CCELL Coil that utilises Vaporesso’s ceramic technology.

    The inbuilt Omni Board Chipset provides multiple protections for the device including short circuit protection, overtime protection, overcharge protection, low liquid detection and auto temperature control.

    Contains:

    • 1 x Nexus AIO Kit
    • 1 x CCELL Coil
    • 1 x Standard Coil
    • 1 x USB Charging Cable
    • 1 x User Manual

    Features:

    • 650 mAh Battery
    • Mounted LED
    • Omni Board Chipset
    • Inhale Activated
    £24.99
    SMOK M17 VAPE STARTER KIT

    The Smok M17 Vape Kit is a thin and compact pen-style device that features a slim 1300mAh battery along with a 2ml, top-filling tank. It is designed as one unit, so the tank section cannot be removed without disassembly.

    The M17 Kit has a fixed wattage setting, always firing at full power until the battery is depleted, which can then be charged via the supplied USB cable. The kit comes with two 0.6Ω Sub Ohm coils, so can be used with the higher VG mixes; unusual for a device of this size.

    Contains:

    • 1 x Smok M17 Vape Kit
    • 2 x M17 0.6Ω Dual Coils
    • 1 x Spare Glass
    • 1 x USB Cable
    • 1 x Accessories Bag
    • 1 x User Manual

    Features:

    • 1300mAh Battery
    • 2ml Tank
    • Top Fill
    • Leak Resistant
    • Small, Compact

    Important Information About Sub Ohm Vaping:

    This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

    We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

    £24.99
    JOYETECH EXCEED EDGE VAPE STARTER KIT

    The Joyetech Exceed Edge Vape Starter Kit is a coil-based pod device that uses Joyetechs EX coil range in refillable pod tank. The Joyetech Exceed Edge Vape Starter Kit has been ergonomically designed with a curved structural chassis taking inspiration from sports cars. A 650mAh battery powers the device, and an over-sized fire key makes using the device a breeze.

    The Excced has a 2ml capacity and comes with an EX 1.2ohm head for mouth to lung enthusiasts, and has a convenient side filling system. The device provides a smooth air intake due to the way it has taken a vertical approach to air intake.

    Please Note: Only the 1.2Ω EX coils will work with this device, the 0.5Ω will not work optimally with the Exceed Edge, as it does not have the power output for a sub ohm coil.

    Contains:

    • 1 x Exceed Edge
    • 1 x EX 1.2 ohm MTL Head
    • 1 x Manual
    • 1 x Warranty Card
    • Spare Parts

    Features:

    • Ergonomic Design
    • 650mAh Battery
    • 2ml Capacity
    • Side Filling System
    £24.99
    JACVAPOUR S17 TF STARTER VAPE KIT

    The JACVapour S17 TF Vape Kit offers both the 1.8ml S17 Top Filling tank, as well as the S17 TF mod that houses a 900mAh internal battery.

    The S17 TF tank features a Stainless Steel and Pyrex Glass construction, along with an adjustable airflow, and a glass viewing window. It supports both Direct to Lung (Sub Ohm) and Mouth to Lung (Non-Sub Ohm) vaping, with a 1.0Ω MTL coil included in the box, and 0.5Ω Sub Ohm coils available to purchase separately.

    The S17 Mod employs a steel alloy construction with a black rubberised finish, and features a USB charging port with pass-through capabilities.

    Contains:

    • 1 x JACVapour S17 TF Vape Tank
    • 1 x JACVapour S17 TF 900mAh Vape Mod
    • 1 x JACVapour S-Series 1.0Ω Coil (Preinstalled)
    • 1 x USB Charging Cable
    • 1 x User Manual

    Features:

    S17 TF Tank

    • Top Filling
    • Adjustable Airflow
    • Pyrex Glass & Stainless Steel Construction

    S17 TF Mod

    • 900mAh Integrated Battery
    • Steel Alloy Construction
    • Rubberised Finish

      Important information about Sub Ohm vaping:

      This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

      We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

      INNOKIN ENDURA T18E VAPE STARTER KIT

      The Innokin Endura T18e Starter Kit is a simple and easy-to-use vaping kit, ideal for a beginner due to its design and simplicity, It comes with all the bits and pieces needed to get going; essentially it's a complete vaping kit.

      The 2ml compliant tank is constructed of Stainless Steel and Pyrex glass, and features a quick-fill twist-top system, making it quick to refill without the mess. Supplied in the tank is a 1.5ohm Prism coil, ideal for mouth-to-lung vaping.

      The 1000mAh battery is charged via USB cable (supplied), as well as pass-through capabilities, meaning the device can be vaped while it's charging. The kit also comes with the Endura vape stand, allowing the user to store the device when it's not being used.

      Please Note: Innokin T18e Coils are not compatible with the standard T18 or T22 tanks.

      Contains:

      • 1 x Innokin Endura T18e Prism Tank
      • 1 x Innokin Endura T18e 1000mAh Battery
      • 2 x 1.5Ω Prism Coils (1 x installed, 1 x spare)
      • 2 x Spare Drip Tips
      • 1 x USB Charging Cable
      • 1 x Endura Vape Stand
      • 1 x User Manual

      Features:

      • 2ml Tank
      • 1000mAh Battery
      • Pass-through Capabilities
      • Stainless Steel
      • Pyrex Glass
      £24.99
      ASPIRE BREEZE 2 VAPE STARTER KIT

      The Aspire Breeze 2 Starter Kit is an upgrade to the Aspire Breeze. This is a compact AIO (All In One) vape kit designed for new users and those looking for a stealthy mouth to lung vape. This vape device features a 1000mAh built in battery, 2ml eliquid capacity and a choice of coils. 

      A clean, simple design and one button operation make the Breeze 2 ideal to take on the go. The 2ml pod can be used with standard high PG eliquids or salt nicotine eliquids, The pods do not need to be replaced when empty simply refill with your favourite ejuice. 

      The Aspire Breeze 2 has been designed for mouth to lung vaping, but also has adjustable airflow allowing the user full control over their inhale. The 1000mAh battery can be charged via USB and there is a mounted LED on the device that indicates battery life. 

      There are two coils included with the kit, allowing the Breeze 2 to use salt nicotine eliquids or standard eliquids depending on which of the Aspire Breeze 2 Coils are used. The 1.0 Ohm coil is designed for salt nicotine eliquids and the 0.6 Ohm coil for standard eliquids.

      Contains:

      • 1 x Aspire Breeze 2 Kit
      • 1 x Charging Cable
      • 1 x 1.0 Ohm Salt Nicotine Coil
      • 1 x 0.6 Ohm Coil
      • 1 x User Manual

      Features:

      • 1000mAh Battery
      • 2ml Capacity
      • Adjustable Airflow
      • Mouth To Lung Vape
      • USB Charging
      £24.99

      Top

      Panel Tool
      Float header
      Float topbar
      Default Boxed Large Boxed Medium
      Header Default Header One