ASPIRE

ASPIRE ATHOS VAPE TANK

The Aspire Athos tank is a high-performance sub ohm vape tank designed for a direct to lung vape. The Athos is constructed with pyrex glass and stainless steel, and can be completely dismantled for easy cleaning and replacement of parts. 

Contains:

  • 1 x Aspire Athos Tank
  • 1 x A5 0.16 Ohm Coil (Preinstalled)
  • 1 x A3 0.3 Ohm Coil
  • 1 x Spare Glass Section
  • 1 x Spare Drip Tip
  • 12 x Spare O Rings
  • User Manual
  • Warranty Card

Features:

  • 2ml Capacity
  • Pyrex Glass Tank
  • Stainless Steel
  • High Performance Coils

Important information about Sub Ohm vaping:

This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

ASPIRE REVVO ARC VAPE TANK

The Aspire Revvo Tank sets to revolutionise coil design, featuring a flat, disc-shaped coil instead of the standard shape we’re used to. The tank is a top-fill top-airflow, and is constructed from Stainless Steel and Pyrex glass, and the innovative ARC (Aspire Radial Coil) sits horizontally in the tank, looking rather similar to a kitchen hob. It utilises an increased surface area due to its shape, which aims to improve flavour and vapour production.

Made of Kanthal, the ARC coil is rated at 0.10Ω - 0.16Ω; a true representation of the fluctuations in resistance (it’s never always exactly the same).

In sharp contrast to most other tanks that house the chimney in the centre, the Revvo tank has a spring-loaded filling tube that’s accessible through the mouth-piece. Aspire have made replacing the coil as simple as possible, and a conical coil mounting aims to reduce spit-back.

A protective cap is provided to assist in keeping the drip tip clean and sanitary, it’s advised to close the airflow when storing the tank.

Contains:

  • 1 x Aspire Revvo Sub Ohm Tank
  • 2 x Aspire Radial 0.10 - 0.16Ω Coils
  • 1 x Glass Tube
  • 10 x O-Rings
  • 1 x Warning Card
  • 1 x User Manual
  • 1 x Warranty Card
  • 1 x Protective Cap

Specifications:

  • Uses Radial “Flat’ Coil Design
  • 0.10 - 0.16Ω Coil Rating
  • Protective Cap
  • Top Filling
  • Top Airflow
£24.99
ASPIRE CLEITO 120 VAPE TANK

The Aspire Cleito 120 tank is a supercharged version of their uniquely designed Cleito tank, and is generally designed for one thing; big clouds and flavour.

Taking the design of the original Cleito, Aspire have fine tuned both tank and coils towards a higher performance, as well as fuller cloud and flavour production. 

The Cleito 120 is built to be used ideally between 100 and 120 Watts, as due to the tank's 0.16 ohm coils, the Cleito 120 is best used on devices capable of 100W or more for the best performance.

Contains:

  • 1 x Aspire Cleito 120 Maxi Watt Tank
  • 2 x 0.16 Ohm Atomizer (1 x installed, 1 x spare)
  • 1 x Warranty Card
  • 1 x Vape Band

Features:

  • 2ml Capacity
  • 25mm Diameter
  • 58mm Height
  • Stainless Steel Construction
  • Pyrex Glass
  • Wide Bore Drip Tip

Important information about Sub Ohm vaping:

This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements, and that your mod can handle the amps.

We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

£24.99
ASPIRE CLEITO EXO VAPE TANK

Aspire's Cleito Exo tank was designed based on the feedback Aspire received from their loyal customers, and they've made improvements in a few ways. Still a top-filling tank, the Cleito Exo also has a top airflow system, as well as airflow ports on the side. It's also been designed to be leak-resistant, and the new airflow system assists with this as well. The Cleito EXO is compatible with both the Cleito EXO coils and regular Cleito coils. 

The TRPR version of the Cleito EXO has a 2ml capacity and ships with a 0.16Ω coil as standard, along with a spare.

The tank also features a reinforced design, with the glass portion of the tank protected by a metal shield, ensuring that cracked glass is no more.

Contains:

  • 1 x Cleito EXO 2ml Tank
  • 2 x 0.16ohm coil (1 x installed, 1 x spare)
  • 1 x Spare Drip tip
  • 2 x Spare O-rings
  • 1 x Warranty Card
  • 1 x User Manual

Features

  • Size: 23.5 x 57 mm
  • Capacity: 2ml (TPD version)/ 3.5ml (Standard version)
  • Coil: 0.4ohm (40 - 60W) / 0.16ohm (60 - 100W)
  • Thread: 510 thread
£24.99
ASPIRE NAUTILUS MINI VAPE TANK

The Aspire Nautilus Mini tank is the smaller, more compact version of the original, full-size Nautilus Tank. Constructed of stainless steel and Pyrex glass, the Nautilus Mini uses Aspire's Nautilus coils, designed especially for that series of tanks, but is also compatible with Aspire's Triton Mini coils, although it's not strictly designed to be a Sub Ohm tank.

It includes a four-port adjustable airflow system, allowing the user to personalise the vaping experience, along with an easy to replace coil system.

The Nautilus Mini's design also makes it easy to carry, install, and refill.

Contains:

  • 1 x Aspire Nautilus Mini Tank
  • 1 x 1.8Ω BVC atomizer (pre-installed)
  • 1 x Replacement BVC atomizer (1.8 ohm)
  • 1 x Beauty Ring
  • 1 x User Manual

Features:

  • 510 Compatible
  • Capacity: 2ml
  • Pyrex Glass
  • Replacement Coils
  • Adjustable Airflow
  • Coil rating: 1.6 and 1.8 ohms
£19.99
ASPIRE NAUTILUS 2 VAPE TANK

The Aspire Nautilus 2 tank is the successor to the original Nautilus and Nautilus Mini tanks. It features a 2ml capacity and a Top Filling mechanism, along with an expanded set of airflow options. This allows the user to dial just the right airflow regardless of coil choice.

Aspire have produced a new 0.7ohm coil for the Nautilus 2, and while it technically is a Sub-ohm atomiser, it's not really designed for the higher powered, direct-to-lung vaping, and should be considered a mouth-to-lung vape. The Nautilus 2 tank is also backwards compatible with the existing Nautilus coils, rated at 1.6ohm and 1.8ohms.

Contains:

  • 1 x Nautilus 2 Tank
  • 1 x Spare Coil
  • 1 x Extra Glass Section
  • 8 x Spare O Rings
  • 1 x User Manual
  • 1 x Warning Card
  • 1 x Spare Drip Tip

Features:

  • 2ml Capacity
  • Top Fill
  • Sub Ohm and Above Ohm Coil Options
  • Metal Sleeve
£19.99
ASPIRE CLEITO VAPE TANK

The Aspire Cleito tank features an innovative design, where Aspire have decided to replace the chimney section of the tank with the actual coil itself. Constructed from stainless steel and pyrex glass, the Cleito also comes with a heat-resistant Delrin drip tip for use with high wattages and temperatures.

Aspire have designed unique Clapton coils exclusively for the Cleito, with the focus of this tank seemingly for fuller vapour production. At present, there are available for the Cleito, both of which are supplied with the tank. There's a 0.2ohm coil rated at 55-70W and a 0.4ohm (installed) rated at 40-60W.

Contains:

  • 1 x Aspire Cleito Tank
  • 1 x Vape Band
  • 4 x Rubber Cleito Cuffs
  • 1 x 0.4ohm Cleito Clapton Coil (40-60W)
  • 1 x 0.2ohm Cleito Clapton Coil (55-70W)

Features:

  • 2ml Capacity
  • Stainless Steel Construction
  • Pyrex Glass

    Important information about Sub Ohm vaping:

    This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements, and that your mod can handle the amps.

    We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

    £19.99
    ASPIRE ATLANTIS EVO VAPE TANK

    The Aspire Atlantis Evo tank is the successor to their esteemed Atlantis 2 tank, and a bigger, sub-ohm brother to their mouth-to-lung Nautilus X tank, also featuring an easy top-filling mechanism.

    The Atlantis Evo is still compatible with the general Atlantis / Triton 2 coil range, but the specific Evo coils themselves have been redesigned with an improved wicking system to ensure fast absorption when using thick, high VG liquids.

    Contains:

    • 1 x Aspire Atlantis EVO Tank
    • 1 x 0.4 Ohm Preinstalled
    • 1 x Spare 0.5 Ohm Coil
    • 1 x Rubber Cuff

    Features:

    • 2ml Capacity
    • Top Fill
    • Pyrex Glass Tank
    • Compatible With Existing Atlantis and Triton Coils

    Important information about Sub Ohm vaping:

    This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

    We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

    £19.99
    ASPIRE K3 VAPE TANK

    The Aspire K3 vape tank has a 2ml eliquid capacity and a tight inhale. Featuring a 19mm diameter, the K3 will sit comfortably on most conventional vape mods. The K3 has a simple bottom fill feature making it quick to fill with ejuice.

    Designed for news users, the Aspire K3 is an easy to use mouth to lung tank ideal for higher PG eliquids and eliquids with a high nicotine content. It uses Aspire BVC Coils that produce enhanced flavour and clouds. 

    Contains:

    • 1 x Aspire K3 Tank
    • 1 x 1.8 Ohm Coil (pre-installed)
    • 1 x User Manual

    Features: 

    • 2ml Capacity
    • Mouth To Lung Vape
    • Bottom Fill
    ASPIRE K2 VAPE TANK

    The K2 Tank by Aspire is a compact tank designed for mouth to lung vaping. The K2 features a 1.8ml capacity and a 510 connection for compatibility with almost any device currently available. The K2 Tank is compatible with Aspire BVC General Replacement coils.

    Contains:

    • 1x Aspire K2 Tank
    • 1x 1.6 Ohm BVC General Replacement Coil (preinstalled)

    Features:

    • 1.8ml Capacity
    • Mouth To Lung Airflow
    • Pyrex Glass 
    • Stainless Steel Construction
    • 510 Connection
    ASPIRE NAUTILUS MINI VAPE TANK

    The Aspire Nautilus Mini tank is the smaller, more compact version of the original, full-size Nautilus Tank. Constructed of stainless steel and Pyrex glass, the Nautilus Mini uses Aspire's Nautilus coils, designed especially for that series of tanks, but is also compatible with Aspire's Triton Mini coils, although it's not strictly designed to be a Sub Ohm tank.

    It includes a four-port adjustable airflow system, allowing the user to personalise the vaping experience, along with an easy to replace coil system.

    The Nautilus Mini's design also makes it easy to carry, install, and refill.

    Contains:

    • 1 x Aspire Nautilus Mini Tank
    • 1 x 1.8Ω BVC atomizer (pre-installed)
    • 1 x Replacement BVC atomizer (1.8 ohm)
    • 1 x Beauty Ring
    • 1 x User Manual

    Features:

    • 510 Compatible
    • Capacity: 2ml
    • Pyrex Glass
    • Replacement Coils
    • Adjustable Airflow
    • Coil rating: 1.6 and 1.8 ohms
    £19.99
    ASPIRE K2 VAPE TANK

    The K2 Tank by Aspire is a compact tank designed for mouth to lung vaping. The K2 features a 1.8ml capacity and a 510 connection for compatibility with almost any device currently available. The K2 Tank is compatible with Aspire BVC General Replacement coils.

    Contains:

    • 1x Aspire K2 Tank
    • 1x 1.6 Ohm BVC General Replacement Coil (preinstalled)

    Features:

    • 1.8ml Capacity
    • Mouth To Lung Airflow
    • Pyrex Glass 
    • Stainless Steel Construction
    • 510 Connection

    Top

    Panel Tool
    Float header
    Float topbar
    Default Boxed Large Boxed Medium
    Header Default Header One