RTA'S

INNOKIN ARES MTL 24MM RTA

The Innokin Ares MTL RTA tank is the result of a collaboration between Innokin and vaping personalities Phil Busardo & Dimitris Agrafiotis (The Vaping Greek).

It features a 24mm diameter and a slide-open top-fill to reduce leaks and spills. It has a narrow chimney for improved MTL flavour production, and a rounded bell for easy filling, smoothness, and reduced air turbulence, with an air port diffuser to distribute the air over the coil.

The Ares has a easy-to-build deck, with a drop-in coil system for easy building, and a single or multi-selection adjustable airflow.

Contains:

  • 1 x Innokin Ares RTA
  • 1 x Spare Drip Tip
  • 1 x Spare Glass Tank
  • 2 x Pre-made Coils
  • 1 x Wire Spool
  • 1 x Cotton
  • 1 x Bag of Spares (O-Rings, Screws)

Features:

  • MTL - Designed For Flavour
  • 24mm Diameter
  • Slide-open Top-fill
  • Easy Build Deck
  • Adjustable Airflow

Important information about Rebuildable Dripping Atomisers:

This product is designed for experienced users, and for those possessing an ohms reader or multimeter to test their coils on. This device requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law.

We don’t advise any beginners to start rebuilding coils without speaking to a knowledgeable shop. A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

£29.99
ADVKEN CP 24MM RTA - 810 EDITION

The Advken CP 810 RTA is an upgrade to the previous CP RTA. The original was a solid RTA(Rebuildable Tank Atomiser), popular among flavour chasers - the 24mm 810 version has built on this and the result is a 2ml RTA, perfect for advanced users.

The CP 810 now features a gold plated build deck for increased heat conduction. This is a spring loaded two post clamp deck ideal for fitting a variety of coil sizes, including premade coils. The CP 810 has been designed to fit single coils only, however, the generous sized deck allows for increased airflow to get the most out of your eliquid.

The Advken CP 2ml, has top fill capability and an 810 drip tip providing heat dissipation to ensure a warm vape.

Contains

  • 1 x Advken CP 810 RTA
  • 1 x 510 Drip Tip Adaptor
  • 1 x Spares Bag

Features:

  • 2ml Capacity
  • Top Fill
  • Gold Plated Deck
  • Two Post Clamp Deck
  • Single Coil Only

Important information about Rebuildable Dripping Atomisers:

This product is designed for experienced users, and for those possessing an ohms reader or multimeter to test their coils on. This device requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law.

We don’t advise any beginners to start rebuilding coils without speaking to a knowledgeable shop. A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

£24.99
DIGI FLAVOR (RIP TRIPPERS) PHARAOH MINI 24MM RTA

he Pharaoh Mini RTA is a collaboration between Digiflavor and vape personality Rip Trippers. It has a 24mm diameter, and features an interchangable deck for personalisation, coming with a clamp deck as standard (Velocity-style deck sold separately). There's a chamber lock system to secure the juice port ring and the chamber, with a mechanical style eLiquid control system to prevent leaks.

Contains:

  • 1 x Pharaoh Mini RTA
  • 1 x 510 Wide Bore Drip Tip
  • 1 x 810 Drip Tip
  • 1 x Spare Glass
  • 1 x 510 Drip Tip Adaptor
  • 1 x Allen Key
  • 1 x Chamber Lock Key
  • 1 x User Manual

Features:

  • 24mm Diameter
  • 510 and 810 Drip Tips
  • Interchangeable Deck
  • Top Fill

Important information about Rebuildable Dripping Atomisers:

This product is designed for experienced users, and for those possessing an ohms reader or multimeter to test their coils on. This device requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law.

We don’t advise any beginners to start rebuilding coils without speaking to a knowledgeable shop. A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

£34.99
VANDY VAPE BERSERKER MINI MTL RTA

The Vandy Vape Berserker Mini MTL RTA, much like the original has been designed with flavour in mind. This 22mm RTA sits well upon small boxes and is ideal for taste-oriented MTL vaping.

The Berserker Mini fits single coil builds with ease and allows for quick set-up and easy wicking. What’s more with the customisable six-step airflow the user has full control of flavour and vapour production.

This 22mm RTA is made of stainless steel with the option to swap between a glass, steel or Ultem window. It also features top fill capability and is easy to disassemble and clean.

Contains:

  • 1 x Vandy Vape Berserker Mini RTA
  • 1 x Delrin Drip Tip
  • 1 x Glass Tank Section
  • 1 x Ultem Tank Section
  • 1 x Spares Pack
  • 1 x Ultem Drip Tip
  • 1 x User Manual

Features

  • 2ml Capacity
  • Top Fill
  • Stainless Steel Construction
  • Six Step Adjustable Airflow

Important information about Rebuildable Dripping Atomisers:

This product is designed for experienced users, and for those possessing an ohms reader or multimeter to test their coils on. This device requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and Ohm’s Law.

We don’t advise any beginners to start rebuilding coils without speaking to a knowledgeable shop. A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

VANDY VAPE REVOLVER 25MM RTA VAPE TANK

The Vandy Vape Revolver RTA (Rebuildable Tank Atomiser) is a 25mm rebuildable atomiserdesigned for flavour chasing. Featuring a 2ml capacity and newly designed build deck, the Revolver is a versatile rebuildable atomiser. This piece of vape hardware is recommended for advanced users only.

The Revolver RTA is well machined, featuring a stainless steel construction and an 18mm drip tip. A top fill mechanism allows the Revolver to be refilled quickly and efficiently. The single coil clamp build deck is a combination of steel and ceramics, the ceramics help to disperse heat into the coil for a faster ramp up. A large coil port allows for a number of different coil types to be used, including premade coils.

The Revolver gets it’s name from the unique revolving airflow fitted to the build deck. By turning the screw located on the side of the deck, you can choose one of three airflow settings for a unique vape experience, focussed on either flavour or cloud. This unique deck is coupled with adjustable bottom airflow for increased customisation.

Contains:

  • 1 x Vandy Vape Revolver RTA
  • 1 x Spares Kit
  • 1 x User Manual

Features:

  • 25mm Diameter
  • 2ml Capacity
  • Single Coil Build only
  • Revolving airflow

Important information about Rebuildable Dripping Atomisers:

This product is designed for experienced users, and for those possessing an ohms reader or multimeter to test their coils on. This device requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and Ohm’s law.

We don’t advise any beginners to start rebuilding coils without speaking to a knowledgeable shop. A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe

£31.99
EDEN ROSE3 22MM RTA

The Rose 3 RTA from Eden Mods is a high-quality RTA that can take almost anything that’s thrown at it. Constructed from Premium 316 Stainless Steel and other high-grade materials, the Rose3 is designed and manufactured in the UK to an extremely high standard. 

It has the ability to be completely disassembled for easy cleaning and maintenance, and the deck is fully removable. A flat and postless deck allows for a multitude of coil builds, with both a Single and Dual airflow system. The Rose3 can be either top fill or bottom fill, and an adjustable 510 pin ensures that a connection is always attainable.

Contains:

  • 1 x Rose3 RTA
  • 1 x Bag of Spares
  • 1 x Stainless Steel Tank Section
  • 1 x Allen Key

Features:

  • 22mm Diameter
  • 316 Stainless Steel Construction
  • Peek insulators
  • REAL juice control
  • Single / Dual feed air channels
  • Adjustable 510 pin
  • Postless deck
  • PC-1000 & SS tank sections
  • Ability to use your own drip tip
  • Top fill or bottom fill
  • Flat build deck for quick and easy coiling
  • Unique spring wire in AFC for adjustability of the airflow
  • 3.5mm airflow for direct lung and tight mouth to lung
  • 2ml juice capacity
  • Fully removable deck, with attached 510 for pulsing
  • Comes with spare spring wires for AFC and an Allen key.

Important information about Rebuildable Dripping Atomisers:

This product is designed for experienced users, and for those possessing an ohms reader or multimeter to test their coils on. This device requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law.

We don’t advise any beginners to start rebuilding coils without speaking to a knowledgeable shop. A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

£99.99
SVOEMESTO KAYFUN PRIME 22MM RTA

The Kayfun Prime Tank is made in Germany by the engineering minds of SvoeMesto. The Kayfun Prime is a Mouth to Lung style of vaping in an innovative RTA. Top-Filling with an adjustable bottom airflow. The Chamber of the Kayfun is reduced to concentrate the flavour of eliquids and ejuices. The Kayfun Prime features the same favourited airflow adjustment ring and liquid control mechanism in the Kayfun series.

Please Note: Every Kayfun Prime metal tank section features an engraving of a famous city name and emblem. Each city will be featured on a limited number of atomisers and in a celebration of SvoeMesto's roots, the first five will be Russian cities, but all are unique and different.

Contains:

  • Fully assembled Kayfun Prime with engraved steel tank*
  • Spare Glass tank section
  • Full spares pack
  • User guide

Features:

  • Top fill design
  • Borosilicate glass window
  • Liquid control (fully adjustable)
  • PEEK insulators
  • 316L stainless steel
  • 2ml capacity
  • Glass and steel tank included
  • Six step external adjustable air flow from 1mm - 2mm
  • Small chamber size for the best possible flavour
  • Serial number for authentication

Important information about Rebuildable Dripping Atomisers:

This product is designed for experienced users, and for those possessing an ohms reader or multimeter to test their coils on. This device requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law.

We don’t advise any beginners to start rebuilding coils without speaking to a knowledgeable shop. A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

£99.99
DOTMOD PETRI 22MM RTA

The dotMod Petri 22mm RTA features a postless deck with a fully fully adjustable airflow system, along with a pyrex glass tank and a 24k gold-plated design. The RTA has elevated internal airflow holes to prevent leaking, and a floating deck to prevent any misalignment of the wicking holes. PEEK insulators allow for excellent conductivity as well as heat resistance, ensuring a user has the ability to put in some high-powered builds.

Contains:

  • 1 x dotMod Petri 22mm RTA Tank
  • 1 x Replacement Pyrex Glass
  • 1 x Replacement cap for the drip tip
  • 1 x Spare 510 pin
  • 1 x Hex Key
  • 1 x Extras (Spare Screws, Replacement Coils, O-Rings)

Specifications:

  • 22mm Diameter
  • 2ml Capacity
  • Pyrex Glass
  • 24K Gold-Plated Construction
  • Adjustable Airflow
  • Postless, Quad Terminal Design
  • PEEK-Insulated Positive Terminal Posts
  • 24K Gold-Plated Floating Deck
  • Elevated Internal Airtubes
  • Widebore Acrylic Drip Tip
  • Gold-Plated 510 Contact Pin

Important information about Rebuildable Dripping Atomisers:

This product is designed for experienced users, and for those possessing an ohms reader or multimeter to test their coils on. This device requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law.

We don’t advise any beginners to start rebuilding coils without speaking to a knowledgeable shop. A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

£59.99
SVOEMESTO KAYFUN 5S 22MM RTA

The Kayfun 5s by Svoemesto is the new full TPD compliant version of their well-renowned tank series.

Constructed from high-quality 316L Stainless Steel and milled immaculately, the Kayfun 5s features an adjustable liquid control, a very easy-to-use top-filling system, and a modified build deck to make coil installation a breeze (pun intended). The deck even features an easy access point that allows access even with juice in the tank.

The Kayfun 5s features four airflow settings, with the widest being allowing for the most airflow ever provided on a stock Kayfun tank:

  • 1.8mm (Smallest)
  • 2.2mm
  • 2.7mm
  • 3.2mm (Widest)

Please Note: The Kayfun 5s is a high-end device, and we recommend only those with a comprehensive understanding of Rebuildables use this device. We do not recommend beginners use this without speaking to us first, we cannot take returned tanks without them being faulty.

    Contains:

    • 1 x Svoemesto Kayfun 5s RTA (with Steel tank installed)
    • 1 x Quartz Glass Tank (Spare)
    • 1 x Pack of Spares
    • 1 x User Manual

    Features:

    • Diameter: 22mm
    • Length: 55mm (not including 510 thread or tip)
    • Capacity: 2ml 
    • 316L Stainless Steel Construction
    • Top filling
    • Anti heat mouthpiece with POM tip (engraved)
    • Liquid control (fully adjustable)
    • Increased maximum liquid flow
    • External four selection airflow control 1.8mm - 3.2mm
    • Enlarged build deck for more comfortable builds
    • Steel and glass tank options
    • M2 coil screws
    • PEEK insulator
    • 510 connector
    • Serial number for authentication
    • Easy assembly and maintenance

    Important information about Rebuildable Dripping Atomisers:

    This product is designed for experienced users, and for those possessing an ohms reader or multimeter to test their coils on. This device requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law.

    We don’t advise any beginners to start rebuilding coils without speaking to a knowledgeable shop. A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

    £99.99
    VANDY VAPE BERSERKER MTL 24MM RTA

    The Vandy Vape Berserker MTL RTA is designed for flavour savouring over vapour production, ideal for those who don’t want to use a whole lot of power, but want the option to personalize the coil deck. It's a top-filling tank with a postless deck, and features reduced airflow (which is still adjustable), and is designed to be used with the lower wattages and higher resistance coils. Vapour is meant to be inhaled slowly, rather than drawn on like it’s our last gasp for air. 

    Contains:

    • 1 x Vandy Vape Berserker RTA
    • 1 x Accessory Bag
    • 1 x Delrin Drip Tip 

    Features:

    • 24mm Diameter
    • Stainless steel construction
    • Top fill design
    • Easy-to-build postless deck, supporting single coil
    • Gold plated 510 pin
    • Designed for mouth-to-lung (MTL) vaping
    • Simply possibility of a real cigarette tightening
    • Bottom airflow, huge air channels
    • Adjustable airhole sizes, 0.1mm, 1.0mm, 1.2mm, 1.4mm, 1.6mm
    • Ultem drip tip and extra Delrin drip tip included
    • 510 threading connection

    Important information about Rebuildable Dripping Atomisers:

    This product is designed for experienced users, and for those possessing an ohms reader or multimeter to test their coils on. This device requires a comprehensive understanding of the technicalities of vaping, along with knowledge of electronics and ohms law.

    We don’t advise any beginners to start rebuilding coils without speaking to a knowledgeable shop. A rebuildable coil must be tested carefully on an ohms reader before it is used on a device. Not testing this properly may present a safety risk for the user, and no new coils should be used on an electronic vaping device until the coil is known to be safe.

    Top

    Panel Tool
    Float header
    Float topbar
    Default Boxed Large Boxed Medium
    Header Default Header One