ELEAF

ELEAF IPOWER 80W VAPE MOD

Eleaf’s iPower mod features a huge 5000mAh integrated battery, along with Temperature Control (TC) options, and a decent 80W of power; it's the iStick 50W, but all grown up. While other iStick mods (such as the TC100W and TC200W) feature replaceble batteries, the iPower's integrated battery and easy charging means its more suitable for new vapers or those looking for a first upgrade.

The iPower is considerably lightweight considering it's large battery size, and also features a compact design with a flatter internal battery that's shaped differently to the standard 18650 batteries.

The Eleaf iPower offers multiple firing modes, along with the ability to upgrade the device with firmware updates available from Eleaf.

    Contains:

    • 1 x Eleaf iPower Mod
    • 1 x USB Cable
    • 1 x User Manual

    Features:

    • Battery: 5000mAh Internal Battery
    • Maximum Output Wattage: 80W
    • Fires Up To 315C / 600F in TC Mode
    • Temperature Control with Ni200, Titanium and Stainless Steel
    • Multiple Firing Modes
    • Upgradeable Firmware
    • Charging: Micro USB
    • 510 Thread

    Important information about Sub Ohm vaping:

    This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements, and that your mod can handle the amps.

    We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

    Battery Capacity
    5000mAh
    Battery Type
    Integrated
    Made In
    China
    Max Wattage
    80W
    Min Wattage
    1W
    Mod Features
    Temperature Control, Variable Wattage
    Tank Features
    Adjustable Airflow
    Vape Hardware Brand
    Eleaf
    Weight:
    200g
    Height:
    8.3cm (3.3")
    Width:
    4.9cm (1.9")
    Depth:
    2.3cm (0.9")
    £39.99
    ELEAF HW-M MULTIHOLE 0.15Ω REPLACEMENT VAPE COILS

    The Eleaf HW Coils are designed for use with Eleaf's Ello Vate Tank. They feature a net-shaped coil design, offering a better lifespan than previous iterations.

    The HW-M 0.15ohm Coil is rated at 50-100 watts, and features a mesh design constructed of kanthal.

    Contains:

    • 5 x Eleaf HW-M 0.15Ω Coils
    £14.99
    ELEAF HW3 0.2 OHM REPLACEMENT COILS

    Eleaf's HW series of coils are designed for use in the Eleaf ELLO tank only. The HW3 features a triple coil construction and is rated at 0.2 Ohms for a direct to lung vape. The coil is designed with vapour production in mind and is rated for use between 50 and 130W, with a recommended range between 70 and 90W. 

    Contains:

    • 5x Eleaf HW3 O.2 Ohm Coils

    Important information about Sub Ohm Vaping:

    This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

    We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

    £12.99
    ELEAF HW-N NET 0.2Ω REPLACEMENT VAPE COILS

    The Eleaf HW Coils are designed for use with Eleaf's Ello Vate Tank. They feature a net-shaped coil design, offering a better lifespan that previous iterations.

    The HW-N 0.2ohm Coil is rated at 40-90 watts, and features a net design constructed of kanthal.

    Contains:

    • 5 x Eleaf HW-N 0.2Ω Coils
    £14.99
    ELEAF HW4 0.3 OHM REPLACEMENT COILS

    Eleaf's HW series of coils are designed for use in the Eleaf ELLO tank only, packaged with the Eleaf Ikonn Kit. The HW4 features a quadruple coil construction and is rated at 0.3 Ohms for a direct to lung vape. The coil is designed with vapour production in mind and is rated for use between 40 and 110W, with a recommended range between 60 and 80W. 

    Contains:

    • 5 x Eleaf HW4 O.3 Ohm Coils

    Important information about Sub Ohm Vaping:

    This device is designed for sub-ohm vaping. It requires more vaping experience to use safely, and extra care should be taken when using a sub ohm tank. Sub Ohm coils will only work on a mod capable of firing sub ohm atomisers, and Ni200 coils will only work on devices capable of Temperature Control. Please ensure that your batteries can handle the extra power requirements and that your mod can handle the amps.

    We also advise not to use any e-liquid with more than 6mg of nicotine, as your vapour may taste harsh. Sub ohm vaping produces a bigger throat hit than standard coils, and extra care should be taken.

    £12.99

    Top

    Panel Tool
    Float header
    Float topbar
    Default Boxed Large Boxed Medium
    Header Default Header One